Created on October 03, 2021 By

AVIJIT

The Mines Act 1952

1 / 130

1. Which are the Mines in India where the Mines Act 1952 are applicable?

(a.) Coal Mines

(b.) Oil Mines

(c.) Iron, Copper, Gold

(d.) All Of These

2 / 130

2. When was the Mines Act formulated?

(a.) 1 July 1952

(b.) 1 July 1953

(c.) 1 January 1952

(d.) 1 April 1953

3 / 130

3. Which Act was applicable to the mines in India before the Mines Act 1952?

(a.) Mines Act 1923

(b.) Mines Act 1935

(c.) Mines Act 1901.

(d.) Mines Act 1947

4 / 130

4. How many sections are there in Mines Act 1952? (sec 01)

(a.) 88

(b.) 90

(c.) 95

(d.) 100

5 / 130

5. Mines Act 1952 is applicable to? (sec 01)

All Over India

in a particular state

6 / 130

6. Under the Mines Act
What is the definition of adult?
What will be the age of a adult person? (Section - 2)

(a.) 18 Years Or More

(b.) 20 Years Or More

(c.) 16 years Or More.

(d.) 25 Years Or More

7 / 130

7. What does the Agent do? (Section - 2).

(a.) Management

(b.) Control

(c.) Supervision & Direction

(d.) All Of these

8 / 130

8. According to the Mines Act what is the definition of a "day"?

(a.) Mid Night To 24 Hours

(b.) 6am to 24hrs

(c.) 12PM to 24 hours

(d.) 8 hours day time

9 / 130

9. What is the meaning of Office in a Mine? {Section - 2}

(a.) A office on the Surface

(b.) A building with workshop on the Surface

(c.) Any office in Under Ground

(d.) None Of These

10 / 130

10. Reportable Accident Means? What is the meaning of reportable accident?
{Section - 2}

any injury other than a serious bodily injury which involves more than 24 hours absent in duty

any injury other than a serious bodily injury which involves more than 72 hours absent in duty

None of the above

11 / 130

11. Meaning of a week?{Section - 2}

(a.) 7 days time.

(b.) 6 days time

(c.) 8 days time

(d.) none of these

12 / 130

12. If any injury which involves; or in probability will involve the permanent loss of any part or section of a body or the use of any part or section of a body, or the permanent loss of or injury to the sight or hearing or any permanent physical incapacity or the fracture of any bone, then which type of injury is this?{Section- 2}

(a.) Miner Accident

(b.) Fatal Accident

(c.) Serious Bodily Injury

(d.) Reportable Accident

13 / 130

13. Where the Mines Act won't apply? {Section - 3}

(a.) Depth is less than 6 meters

(b.)The depth is less than 15 meters (coal)

(c.) Where less than 20 people work in a day.

(d.) All these

14 / 130

14. Referring to the time of day (When does the time of day start? (Section - 4)

(a.) 5.30 hrs ahead of Green which mean Time.

(b.) 5.30hrs behind Time Green which mean Time

(c.) equal to Greenwich Time

(d.) none of these

15 / 130

15. Chief Inspector appointed by? {Section - 5}

(a.) Central Government

(b.) IBM

(c.) DGMS

(d.) Coal India

16 / 130

16. By whom inspector of mines is appointed?

(a.) Central Government

(b.) DGMS

(c.) IBM

(d.) Chief Inspector

17 / 130

17. Chief Inspector or Inspector Discharge his powers under which law (Section 7)

(a.) Code Of Criminal Procedure 1973

(b.) Code Of Criminal Procedure 1975

(c.) Code Of Criminal Procedure 1974

(d.) None Of These

18 / 130

18. Before going to a mine, notice is given to mine manager how many day's before entering into the mine? (Section - 8 )

(a.) 14 Days.

(b.) 7 Days

(c.) 3 Days

(d.) 21 Days

19 / 130

19. Committee in Mines are formed under which section?

(a.) Section - 5

(b.) Section - 12

(c.) Section - 57

(d.) Section - 21

20 / 130

20. What will be the total number of members in a Committee?

(a.) 8

(b.) 10

(c.) 5

(d.) 15

21 / 130

21. The Chairman of the Commeittee is appointed by whom? (Section 12)

(a.) Central Government.

(b.) IBM

(c.) DGMS

(d.) Coal India

22 / 130

22. Constitution of the Committee under the Mines Act 1952 is formed by? {Section - 12}

(a.) Central Government

(b.) Coal India Limited

(c.) DGMS

(d.) IBM

23 / 130

23. Who shall bear the expenses of the Committee set up by the Central Government?
{Section - 15}

Answer = Manager, Owner, Agent.

anyone

DGMS

District Magistrate

24 / 130

24. Notice of mining operation by Manager/Owner/Agent to be given to whom?
(Section 16)

(a.) Chief Inspector

(b.) IBM

(c.) District Magistrate

(d.) All Of These

25 / 130

25. Before starting Mining Operation, Manager/Owner/Agent - shall give notice ti CI _______ days before commencement of operation (Section 16)

(a.) 7 Days

(b.) 14 Days

(c.) 21 Days

(d.) 1 Month

26 / 130

26. Whether the Owner, Agent who has the qualification of Manager, can appoint himself as manager? {Section - 17}

Yes

Special permission needed from Central govt

May be

27 / 130

27. What shall be the distance between the drinking water arrangement and toilet/latrine/urinal?

(a.) 6 Meter

(b.) 15 Meter

(c.) 9 Meter

(d.) 30 Meter

28 / 130

28. Fore how many persons, the drinking water shall be effectively cooled by mechanical or other means?

(a.) 50

(b.) 100

(c.) 150

(d.) 500

29 / 130

29. The scale of latrine accommodation shall be at least one seat for every ____persons(Section 20.)

(a.) 500

(b.) 100

(c.) 150

(d.) 50

30 / 130

30. First Aid rooms shall be provided at every mine employing more than _____ persons on any one day. (Section 21)

(a.) 150

(b.) 500

(c.) 100

(d.) 50

31 / 130

31. First Aid stations shall be provided at every mine employing more than ____ persons on any one day {Section - 21}

(a.) 50

(b.) 150

(c.) 500

(c.) 1000

32 / 130

32. Power to Prohibit Employment in Certain Cases Come Under
Which Section of the Mines Act 1952?

(a.) Section 22

(a.) Section 22A

(c.) Section 13

(d.) None Of these

33 / 130

33. If there is an accident in mines, For how many days the notice of the accident shall be kept on the notice board?
(Section - 23)

(a.) 7 Days

(b.) 14 Days

(c.) 21 Days

(d.) 30 Days

34 / 130

34. If any incident (Reportable) or near-miss occured in a mine, then within how many days will the record be sent to the Chief Inspector?
(Section - 23)

(a.) 1 Month

(b.) 3 Month

(c.) 6 Month

(d.) 1 Year

35 / 130

35. Where a notice given under sub-section(1) relates to an accident causing loss of life, the authority shall make an inquiry into the occurrence within how many days? (Section - 23))

(a.) 14 Days

(b.) 1 Month

(c.) 2 Month

(d.) 3 Month

36 / 130

36. A copy of the entries in the register referring to an incident shall be sent to the CI by the owner, agent or manager of the mine, in which date? (Section - 23)

On or before 20th January

On or before 31st December

On or before 20th april

Within 1 month of the incident

37 / 130

37. Where the Chief Inspector or any Inspector fails to inspect the place of accident, within ________ hours of the time of the accident, work may be resumed at the place of the accident. (Section - 23)

(A) 24 Hours.

(B) 48 Hours

(D) 96 Hours

38 / 130

38. In Which Of The Following Cases, Place Of Accident Not to Be
Disturbed ?(Section - 23)

(a.) Fatal Accident

(b.) Serious Bodily Injury

(c.) Fatal & Serious Accident both

(d ) None Of The Above

39 / 130

39. The power of the Government to appoint a court of enquiry in cases of accidents is mentioned in which section of the Act?

(a.) Section - 24

(b.) Section - 27

(c.) Section - 28

(d.) None Of these

40 / 130

40. Court of enquiry is constituted by? {Section - 24}

(a.) Chief Inspector

(b.) DGMS

(b.) Central Government

(d.) None Of These

41 / 130

41. Whome to submit the report after an investigation by the Court Of Inquiry ? {Section - 24}

(a.) Central Government.

(b.) DGMS

(c.) Owner/Agent/Manager

(d.) All Of These

42 / 130

42. Who are responsible for producing all documents as required by the Court of Inquiry? {Section - 24}

(a.) Mines Owner.

(b.) Coal india

(c.) DGMS.

(d.) Central Govt

43 / 130

43. Where any person employed in a mine contacts any disease notified by the Central Government in the official Gazette as a disease connected with mining operations the O/A/M of the mine, as the case may be, shall send notice thereof to the Chief Inspector within how many days (Section - 25)

(a.) 1 Days

(b.) 2 Days.

(c.) 7 Days

(d.) 3 Days

44 / 130

44. Weekly Day Of Rest Means (Weekly Rest) ? (Section 28.)

(a.) 1 Day Rest

(b.) 2 Days Rest

(c.) 6 Days Rest.

(d.) 7 Days Rest

45 / 130

45. If any person deprived of any of the weekly days of rest, he shall be allowed to take it within how many days? {Section - 29}

(a.) 7 Days

(b.) 15 Days

(c.) 1 Month

(d.) 2 Month

46 / 130

46. As per Mines Act, no persons shall be allowed to work for more than how many hours in a day? {Sec- 30}

a.) 8

b.) 9

c.) 10

d.) 12

47 / 130

47. As per Mines Act, no person shall be allowed to work for more than how many hours in a week ? (Section- 30 )

(a.) 48

(b). 60

(c.) 52

(d.) 72

48 / 130

48. In Emergency Conditions, maximum how many hours a person can work? {Section - 30}

(a.) 8

(b.) 9

(c.) 10

(d.) 12

49 / 130

49. Any person shall not work for more than _____ hours continuously before he has had an interval for rest of at least ____ hour: {Section - 30}

4 hours; 0.5 hours

4 hours; 1 hours

5 hours; 0.5 hours

5 hours; 1 hours

50 / 130

50. After how many continuous hours of work any person should take rest of 30 minutes? {Section - 30}

(a.) 5

(b.) 6

(c.) 8

(d.) 10

51 / 130

51. No person employed below ground in a mine shall be allowed to work for more than ____ hours in a day. {Section - 31}0}

a.) 9

b.) 8

c.) 10

d.) 12

52 / 130

52. As per the Mines Act - 1952, in Under Ground, how many more hours can be worked in a week in Mines?
{Section - 31}

a.) 48

b.) 56

c.) 60

d.) 72

53 / 130

53. A weekly day of rest shall mean in his case a period of ____ consecutive hours beginning when his shift ends {Section - 32}

(a.) 10

(b.) 12

(d.) 24

54 / 130

54. After how many hours of work on the surface, overtime shall be given? {Section -33}

55 / 130

55. No person shall be required or allowed to work in a mine if he has already been working in any other mine within the preceding ____ hours. {Section - 34}

56 / 130

56. Maximum number of hours a person can work including overtime (Section 35)

a.) 8

(b.) 9

c.) 10

(d.) 12

57 / 130

57. How is overtime calculated?

(a.) Work more than 30 minutes from the working time.

(b.) Work more than 1 hour from the working time.

(c.) Work more than 2 hours from the working time.

(d.) None of these.

58 / 130

58. How many days before the commencement of work, the notice of 'hours of work' shall be posted on notice board? {Section - 36}

(a.) 7 Day

(b.) 14 Day

(c.) 21 Day

(d.) 30 Day

59 / 130

59. What is the minimum age of Apprentice/Trainee in Mines? (Section 40 )

60 / 130

60. After the amendment of the Act in 1983, what shall be the minimum age of persons who shall be allowed to work in any mine or part thereof?(Section - 40}

(a.) 18 Years

(b.) 20 Years.

(c.) 21 Years

(d.) 25 Years

61 / 130

61. Prohibition of the presence of persons below eighteen years of age in a mine is mentioned in which section of the Act?

62 / 130

62. What is the time of employment for deploying a woman in a mine (Section 46.)

a.) 6 Am To 7 Pm.

b.) 6 Am To 10 Pm

c.) 5 Am To 6 Pm

d.) Any time

63 / 130

63. Notwithstanding anything contained in this Act, no employment of any woman is permitted in between?

6 Pm To 6 Am

12 Am To 6 Am

8 Pm To 6 Am

10 Pm To 5 Am

64 / 130

64. Every woman employed in a mine above ground shall be allowed an interval of not less than e_________ between the termination of employment on any one day and the commencement of the next period of employmen { Section - 46}

(a.) 11 hours

(b.) 12 Hours

(c.) 15 Hours

(d.) 24 Hours

65 / 130

65. Attendance Record of Persons Employed in Mines shall be recorded in which form ? {Section - 48

(a.) Form D

(b.) Form B

(c.) Form E

(d.) Form E

66 / 130

66. In which section definition of leave is there?{Section - 50}

Sec 2

Sec 2/JJ

Sec 49

Sec 50

67 / 130

67. According to Mines Act 1952 what is "Calenender Year"? {Section- 51}

(a.) 1 January To 31 December

(b.) 1 April To 30 March

(c.) 1 May To 30 April

(d.) None Of These

68 / 130

68. In the case of a person employed below ground, at the rate of one day for every _____ days of work performed by him, leave shall be credited {Section - 52}

(a.) 7 Days

(b.) 14 Days

(c.) 15 Days

(d.) 30 Days

69 / 130

69. In the case of a person employed on the surface, at the rate of one day for every _______ days of work performed by him, leave shall be credited {Section - 52}

1.) 15 days

2.) 20 days

3.) 14 days

4.) 21 days

70 / 130

70. A calendar year’s service shall be deemed to have completed, if he/she works {Section - 52}

Underground = 200 Days; Surface = 220 Days

Underground = 240 Days; Surface = 190 Days

Underground = 150 Days; Surface = 190 Days

Underground = 190 Days; Surface = 240 Days

71 / 130

71. How many days of Maternity Leave does a female employee get?{Section - 52}

a.) 12 weeks

b.) 26 weeks

c.) 30 weeks

d.) 35 weeks

72 / 130

72. A person employed in a mine shall inform the manager, how many days before taking a leave?{Section - 52}

(a.) 7 Days

(b.) 14 Days

(c.) 15 Days

(d.) 20 Days

73 / 130

73. How many times in a Calendar Year, a person employed in Mines can take leave? {Section - 52}

(a.) 3

(b.) 7

(c.) 14

(d.) 15

74 / 130

74. The total number of days of leave which may be accumulated by any such person shall not at any one time exceed ?{Section -
52}

(a.) 15 days

(b.) 30 days

(c.) 3 Month

(d.) 6 Month

75 / 130

75. For the leave allowed to a person employed in a mine under section 52, he shall be paid at a rate equal to the _______ of his total full-time earnings for the days on which he was employed during the month immediately preceeding his leave
{Section - 53}

(a.) 15 days

(b.) Monthly Average

(c.) Daily Average

(d.) As per the choice of Manager

76 / 130

76. Any person employed in a mine who has been allowed leave for not less than ______days shall before his leave begins be paid the wages due for the period of the leave allowed. {Section - 54}

77 / 130

77. Under which section of the Mines Act, Regulations are made? (Section- 57)

(a.) Section 57

(b.) Section 61

(c.) Section 28

(d.) Section 58

78 / 130

78. If the surface has "Railway Line, Building, Structure", how many meters of pillar shall be left at that place?

(a.) 15 Meter

(b.) 21 Meter

(c.) 30 Meter

(d.) 45 Meter

79 / 130

79. In which year was the Indian Explosive Act made?

(a.) 1984

(b.) 1935

(c.) 1884

(d.) 1985

80 / 130

80. When was the Railway Act made?

1890

1980

1880

1760

81 / 130

81. Mines Rule 1955, under which section of the Mines Act, it has been made? (Section - 58)

(a.) Section 57

(b.) Section 58

(c.) Section 61

(d.) Section 67

82 / 130

82. The mines wherein any women employed or were employed on any day of the preceding twelve months of suitable rooms to be reserved for the use of children under the age of _____years (Section - 58)

(a.) 5

(b.) 6

(c.) 18

(d.) 20

83 / 130

83. A shelter shall be made if how many people are employed in Mines? {Section - 58}

(a.) 50

(b.) 100

(c.) 150

(d.) 500

84 / 130

84. Canteen shall be made, if how many persons employed in a mine? {Section - 58}

(a.) 250 Or More

(b.) 150 Or More

(c.) 500 Or More

(d.) 1000 Or more

85 / 130

85. Welfare officer shall be employed, if how many persons are employed in a mine? {Section - 58}

(a.) 100

(b.) 200

(c.) 500

(d.) 2500

86 / 130

86. If 1000 people are working in a mine, then in that mine, how many canteens will be made? {Section - 58}

(a.) 1

(b.) 2

(c.) 5

(d.) 5

87 / 130

87. Under which section of the Mines Act, By - Law has been made?

a.) Section 61

b.) Section 51

c.) Section 57

d.) Section 67

88 / 130

88. By - Laws are made by whom? (Section - 61)

(a.) Manager

(b.) Owner

(c.) Agent

(d.) All Of These

89 / 130

89. What are the information generally By-Laws provide? (Section- 61)

(a.) Machine Operation

(b.) Regulations.

(c.) Rules

(d.) None Of These

90 / 130

90. After approving the 'By-laws' by the mine manager, to whom it has to be sent? (Section - 61)

(a.) IBM

(b.) Chief Inspector Or Mines Inspector

(c.) DGMS

(d.) Central Government

91 / 130

91. Within how many days, the by-laws has to be sent to CI by O/A/M? (Section - 61)

(a.) 14 Days

(b.) 15 Days

(c.) 1 Month

(d.) 2 Month

92 / 130

92. Mine Act, Regulation, Rules are made by whom? (Section - 61A)

(a.) District Mgistrate

(b.) DGMS.

(c.) Parliament

(d.) Coal India Limited

93 / 130

93. If any person obstructs to discharge the duties by Chief Inspector or Inspector what shall be the punishment? (Section - 63)

(a.) 3 Month Jail Or ₹ 500 Fine or both

(b.) 1 Month Jail Or ₹ 1000 Fine or both

(c.) 6 Month Jai

(d.) None Of These

94 / 130

94. If any person refuses to provide Register or Document to the Chief what shall be the punishment (Section - 63(2)

(a.) 200

(b.) 300

(c.) 1000

(c.) 2000

95 / 130

95. What is the punishment mentioned in the Act for falsification of records or certificates? (Section - 64)

(a.) 5 months in jail and 1000 fine or both.

(b.) 1 month jail and ₹500 fine

(c.) 6 months jail and ₹ 2000 fine

(d.) 3 months in jail and 1000 fine or both

96 / 130

96. What is the punishment for using false certificate of fitness? (Section - 65)

(a.) 1 month jail and ₹ 200 fine or both

(b.) 3 months Jail ₹500 fine

(c.) 6 months in jail and ₹ 1000 fine

(d.) any of these No

97 / 130

97. Punishment for omission to furnish plans without any reason? (Section - 66)

(a.) ₹100

(b.) 500

(c.) 1000

(d.) 2500

98 / 130

98. Punishment for prohibiting/ retricting or regulating the employment or presence of persons in or about a mine(Section- 67}

3 months imprisonment or ₹ 1000 fine or both

5 months imprisonment or ₹ 1000 fine or both

6 months imprisonment or ₹ 1000 fine or both

9 months imprisonment or ₹ 1000 fine or both

99 / 130

99. What shall be the penalty for employment of person below 18 years of age? (Section - 68)

(a.) 300

(b.) 500

(c.) 2000

(d.) 2500

100 / 130

100. What shall be the punishment in contravention of the provisions of section 17, if fails to appoint a manager(Section - 69)

(a.) 3 months imprisonment and ₹ 2500 fine or both

(b.) 6 months old Punishment and ₹3000 fine

(c.) ₹ 2500 fine

(d.) any of these No.

101 / 130

101. Whoever in contravention of the provision of sub-section (1) of section 23 fails to give notice of any accidental occurrence or to post a copy of the notice on the special notice board referred to in that sub-section and to keep in there for the period specified shall be punishable with__________? (Section - 70)

(a.) 1 months imprisonment or ₹ 500 fine or both

(b.) 2 months old Punishment and ₹1000 fine

(c.) 3 months imprisonment or ₹ 500 fine or both

(d.) any of these No.

102 / 130

102. If O/A/M fails to record in the prescribed register to give notice of any accidental occurrence shall be punishable with ______?(Section - 70)

(a.) 3 months imprisonment and ₹ 500 fine or both

(b.) 1 month old Punishment and ₹1000 fine

(c.) 6 months imprisonment

(d.) of these No one

103 / 130

103. Where the owner, agent or manager of a mine, as the case may be, has taken proceeding under this Act against any person employed in or about a mine in respect of an offence under this Act, he shall within _________ days from the date of the judgement or order of the court report the result thereof to the Chief Inspector (Sec - 71)

(a.) 14 Days

(b.) 21 Days.

(c.) 2 Month

(d.) 6 Month

104 / 130

104. Which punishment shall be imposed for violating section 22 or 22 A? (Sec. - 72B)

(a.) 1 years in jail and ₹5000 fine

(b.) 6 months in jail and ₹3000 fine

(c.) 2 years in jail and ₹5000 fine

(d.) any of these No.

105 / 130

105. Punishment for willfully neglect the arrangement of the provisions for the purpose of securing the health or safety of the persons employed therein(Section 72(c)

(a.) 3 months imprisonment or ₹ 1000 fine or both

(b.) 6 months old Punishment or ₹ 500 fine

(c.) 1 month imprisonment

(d.) any of these No .

106 / 130

106. Special provision for contravention of law with dangerous results- if in such contravention results in loss of life, then what shall be the punishment?(Section 72(c)

(a.) 1 year in jail or ₹ 5000 fine or both

(b.) 6 months ₹ 1000 fine

(c.) 3 months imprisonment

(a.) 2 year in jail or ₹ 5000 fine or both

107 / 130

107. Special provision for contravention of law with dangerous results- If such contravention results in serious bodily injury, then what shall be the punishment? (Section - 72C)

(a) 1 year jail or 5000 thousand rupees fine or both

(b) 1 years in jail or 3000 thousand rupees fine or both

(d) none of these

108 / 130

108. Special provision for contravention of law with dangerous results- If such contravention results in small injury, then what shall be the punishment? (Section - 72C)

(a.) 3 months jail or ₹ 1000 fine or both

(b.) 1 month imprisonment or ₹500 fine

(c.) ₹ 5000 h fine

(d.) none of these

109 / 130

109. Where a person having been convicted under section 73 is again convicted thereunder, shall be punishable with_____?

Triple the punishment provided by sub-section

double the punishment provided by sub-section

same

Termination of job

110 / 130

110. Where the owner, agent or manager of a mine, accused of an offence under this Act, alleges that another person is the actual offender, he shall be entitled, upon complaint made by him in this behalf and on his furnishing the known address of the actual offender and on giving to the prosecutor not less than __________days notice in writing of his intention to do so, to have that other persons brought before the court
(Section - 77)

(a.) 3 Days

(b.) 7 Days

(d.) 14 Days

(d.) 30 Days

111 / 130

111. When O/A/M fails to comply with the order of the court made under section 78, what shall be the punishment? (Section - 78)

(a.) 6 months jail and daily ₹ 100 fine

(b.) 3 months in jail and ₹ 1000 fine

(c.) 6 months jail

(d.) None of these.

112 / 130

112. Act, Regulation or Rules are made by whom?

(a.) Parliament

(b.) DGMS

(c.) IBM.

(d.) Coal India Limited

113 / 130

113. Who can make changes in the Act, Rules, Regulations?

(a.) State govt

(b.) IBM.

(c.) Central Government

(d.) DGMS

114 / 130

114. Under section 57, provisions for which regulations have been made?

(a.) Coal Mines Regulation 2017/1957

(b.) Metal Mine Regulation 1961

(c.) Oil Mine Regulation 1984

(d.) a & b

(e) All a, b and c

115 / 130

115. Provisions for which regulations have been made in section 58

(a.) Mine Rules 1955.

(b.) Mines Rescue Rules 1985

(c.) Mines Crèche Rules 1966

(d.) Coal mines Pithead Bath Rules 1959

(e.) Mines Vocational Training Rules 1966

(f.) All Of these

Only a

116 / 130

116. Whose responsibility is to comply with the rules and regulations under mines act?

(a.) Manager

(b.) Owner

(c.) Agent

(d.) All Of The Above

117 / 130

117. Reportable Injury means?

any injury other than a serious bodily injury and absence of 24 hours

any injury other than a serious bodily injury and absence of 72 hours

any injury other than a serious injury irrespective of absentism

Loss of body parts

118 / 130

118. What does an Agent do?

(a.) Management

(b.) Control

(c.) Supervision & Direction

(d.) All Of these

119 / 130

119. What kind of medical examination is done before joining the mine? (Page -96)

(a.) PME.

(b.) IME

(d) None of the above

120 / 130

120. Interval of PME? (Page - 96)

(a.) 5 years

(b.) 10 Years

(c.) 5 years but can be changed by Mine Manger

(d.) 3 years

121 / 130

121. PME for the persons o above 45 years' of age? (P- 96)

(a.) 2 Years

(b.) 3 Years

(c.) 5 Years

(d.) 10 Years

122 / 130

122. PME for a person having age of 67 years? (P- 96

(a.) He can not be appointed in mines

(b.) 3 Years

(c.) 1 years

(d.) 5 years

123 / 130

123. HEMM Operator's vision test is required in every _________ years?

(a.) 1Years

(b.) 3 Years

(c.) 5 Years

(d.) 10 Years

124 / 130

124. Within how many years, PME should done for the persons employed in asbestos mines?

(a.) 1 Years

(b.) 2 Years

(c.) 3 Years

125 / 130

125. What type of equipment are mandatory in the PME Center?

(a.) X-ram machine

(b.) penis function machine

(c.) Hearing power machine

(d.) ILO Test Nuconomosis Machine

(e.) All Of These

126 / 130

126. What are the notified diseases?

(a.) Silicosis

(b.) Numoconiosis

(c.) Maganese Poisoning

(d.) Asbestosis

(e.) Lungs Cancer and Stomach Cancer

(f.) Noise Induced Hearing Loss

(g.) All these.

a, b and d

127 / 130

127. If the worker working in Mines has any of the Notified Diseases, then within how many days,the O/A/M shall report it to proper authority?

(a.) 3 Days

(b.) 5 Days

(c.) 7 Days

(d.) 14 Days

128 / 130

128. The O/A/M shall report to whom, regarding the detection of notified diseases in his mine?

(a.) Chief Inspector.

(b.) Regional Inspector

(c.) District Megistrate.

(d.) Coal Mines Labour Welfare Commissioner

(e.) All Of These

129 / 130

129. On how many people working in Surface Or Open Cast Mine?
cold water shall be arranged?

(a.) 100

(b.) 150

(c.) 500

(d.) 1000

130 / 130

130. Provision of shelter over how many people ordinarily employed in Mines?

(a.) 25

(b.) 50

(c.) 100

(d.) 150

NameEmailPhone Number

Your score is

The average score is 52%

LinkedIn Facebook VKontakte

Exit

Created on October 29, 2021 By

AVIJIT

The Mines Rules 1955

1 / 118

Category: The Mines Rule 1955

1. The registers of reportable injury and minor accidents shall be maintained in which form?

a. Form S

b. Form U

c. Form Q

d. Form J

2 / 118

Category: The Mines Rule 1955

2. What shall be the minimum basic pay of a welfare officer?

a. 100 rupees per mensem

b. 200 rupees per mensem

c. 500 rupees per mensem

d. 1000 rupees per mensem

3 / 118

Category: The Mines Rule 1955

3. If a welfare officer is unable to perform his duties, the O/A/M can appoint another person whom he considers competent, but maximum how many days that person can act as welfare officer?

a. 7 days

b. 14 days

c. 30 days

d. 60 days

4 / 118

Category: The Mines Rule 1955

4. After the appointment of a Welfare officer by O/A/M, within how many days the notice shall be sent to Chief inspector?

a. 30 days

b. 14 days

c. 7 days

d. 15 days

5 / 118

Category: The Mines Rule 1955

5. No person shall act as welfare officer of a mine unless he possesses -

a. A university degree

b. a degree or diploma in social science about welfare

c. a knowledge of the local language

d. A and B

e. All A, B and C

f. A and C

g. B and C

6 / 118

Category: The Mines Rule 1955

6. For how many persons ordinarily employed in a mine, one additional welfare officer shall be deputed, and at what scale?

a. 2000; one for every 1000 persons

b. 2500; one for 2000 persons

c. 1000; one for every 1000 persons

d. 1000; one for every 2000 persons

7 / 118

Category: The Mines Rule 1955

7. For how many persons ordinarily employed in a mine, provision for welfare officer is there?

a. 500

b. 200

c. 1000

d. 250

8 / 118

Category: The Mines Rule 1955

8. The terms of office of the elected members for canteen managing committee shall be ?

a. 1 years

b. 3 years

c. 5 years

d. 2 years

9 / 118

Category: The Mines Rule 1955

9. How many members can be there in a canteen managing committee?

a. 5

b. 2 to 5

c. 3 to 5

d. at least 3

10 / 118

Category: The Mines Rule 1955

10. What shall be the scale of members in a canteen managing committee?

a. 1 for every 100 persons

b. 1 for every 1000 persons

c. 1 for every 500 persons

d. 1 for every 250 persons

11 / 118

Category: The Mines Rule 1955

11. Who can nominate the members of canteen managing committee?

a. Manager

b. Owner or Agent

c. Chief Inspector

d. Any mining industry

12 / 118

Category: The Mines Rule 1955

12. At what frequency, the canteen managing committee shall consult the matters related to the canteen?

a. not less than once a month

b. Once in a month

c. quarterly

d. None of the above

13 / 118

Category: The Mines Rule 1955

13. The inside walls of kitchen of canteen shall be painted at what frequency?

a. In every 4 months

b. Once in a year

c. Once in every 6 months

d. Once in every 3 years

14 / 118

Category: The Mines Rule 1955

14. The wood work or iron structures shall be painted at what frequency?

a. once in a year

b. Once in every 2 years

c. Shall not painted. Those shall be varnished.

d. Once in every 3 years

15 / 118

Category: The Mines Rule 1955

15. At what frequency, the inside wall of a canteen shall be white washed?

a. Once in a year

b. Once in 2 years

c. Once in 2 years

d. In every 6 months

16 / 118

Category: The Mines Rule 1955

16. The canteen shall be situated ______m away from any latrine, urinal, boiler house etc.

a. 10m

b. 15m

c. 6m

d. 12m

17 / 118

Category: The Mines Rule 1955

17. Provisions of the canteen for how many persons are ordinarily employed in a mine?

a. 200

b. 150

c. 300

d. 250

18 / 118

Category: The Mines Rule 1955

18. What shall be the height of the roof in a shelter of a mine if the roof is a sloping one?

a. 1.8m at the lowest part

b. 3.5m at the highest part

c. Both A and B

d. None of the above

19 / 118

Category: The Mines Rule 1955

19. If the roof of a shelter in a mine is of flat roof, the what should be its height?

a. 2.0m

b. 2.5m

c. 3.2m

d. 4.0 m

20 / 118

Category: The Mines Rule 1955

20. Evry shelter in a mine shall have a floor area of ?

a. Not less than 14 m2

b. Not less than 24 m2

c. Not less than 15 m2

d. Not less than 25 m2

21 / 118

Category: The Mines Rule 1955

21. provision of shelter for how many persons ordinarily employed in a mine?

a. 200

b. 150

c. 50

d. 300

22 / 118

Category: The Mines Rule 1955

22. On which day of the year, the O/A/M of a mine shall exhibit on the notice board at the office, information regarding leave with wages?

a. On 20th January

b. On or before 20th February

c. On or before 30th April

d. In between 15th March to 15th April

23 / 118

Category: The Mines Rule 1955

23. For how many days the register of leave with wages shall be preserved?

a. 2 years

b. 3 years

c. 5 years

d. None of the above

24 / 118

Category: The Mines Rule 1955

24. Register of Leave with wages shall be maintained in which form?

a. Form E

b. Form F

c. Form G

d. Form H

25 / 118

Category: The Mines Rule 1955

25. Can an apprentice or trainee below 18 years of age be employed in a mine ?

a. Yes but but not below 15 years of age

b. Yes but under immediate supervision of a competent person

c. Yes but not below 16 years of age.

d. Yes, but when the area is hazardous, then under immediate supervision of a competent person

26 / 118

Category: The Mines Rule 1955

26. As per the mines rules 1955, termination of employment shall be maintained in which form?

a. Form B

b. Form C

c. Form D

d. Form A

27 / 118

Category: The Mines Rule 1955

27. As per The Mines Rules 1955, the register of compensatory days of rest shall be maintained in which form?

a. Form F

b. Form L

c. Form B

d. Form A

28 / 118

Category: The Mines Rule 1955

28. Which of the following shall not be deemed to be a person holding a position of supervision or management or employed in a confidential capacity-

a. Undermanager

b. Electrical engineer

c. Surveyor

d. Geologist

29 / 118

Category: The Mines Rule 1955

29. In every open cast working, one first aid station for how many persons shall be provided?

a. 50

b. 100

c. 150

d. 200

30 / 118

Category: The Mines Rule 1955

30. At every mine employing more than _____ persons on any one day, there shall be provided a suitable first aid room.

a. 100

b. 150

c. 200

d. 250

31 / 118

Category: The Mines Rule 1955

31. On or before the ______ day of every month, there shall be displayed on a notice board outside the office of the mine a list of all persons who have not been allowed compensatory days of rest during that month, and the dates on which compensatory days of rest will be allowed to them in the following _______months.

a. last day; 2 months

b. First day; 3 months

c. 15th Day; 1 month

d. 15th Day ; 3 months

32 / 118

Category: The Mines Rule 1955

32. As per the Mines Rules 1955, the weekly day of rest shall be maintained in which form?

a. Form A

b. Form B

c. Form C

d. Form B1

33 / 118

Category: The Mines Rule 1955

33. In which case the weekly day of rest shall be posted on conspecuous places?

a. In every cases

b. When weekly day of rest is different for different employees

c. When O/A/M thinks fit

d. When weekly day of rest is on the same day for all employees

34 / 118

Category: The Mines Rule 1955

34. For the purpose of sections 28 and 29, a day of rest for any person shall mean period of rest of at least ______ consecutive hours.

a. 8

b. 16

c. 24

d. 48

35 / 118

Category: The Mines Rule 1955

35. The first aid room shall be in charge of a qualified medical practitioner, where the number of persons ordinarily employed in a mine is more than?

a. 500

b. 1000

c. 1200

d. 1500

36 / 118

Category: The Mines Rule 1955

36. What are the equipment shall be provided in a first aid room?

a. X-ray machine, stethoscope and other medical equipment

b. As per the advice given by the medical practitioner

c. As per the equipment mentioned in second schedule

d. As per the equipment mentioned in first schedule

37 / 118

Category: The Mines Rule 1955

37. How much floor space should be available in a first aid room?

a. 24 m2

b. 15 m2

c. 30m2

d. 10 m2

38 / 118

Category: The Mines Rule 1955

38. For how many persons ordinarily employed in a mine, first aid room shall be provided?

a. 50

b. 100

c. 150

d. 200

39 / 118

Category: The Mines Rule 1955

39. Availability of First Aid personnel shall be-

a. During every working shift

b. During general shift

c. Once in 24 hours

d. As per the decision made by O/A/M

40 / 118

Category: The Mines Rule 1955

40. Receptacles and night soils shall be cleaned and disinfected at least once in every?

a. 7 days

b. Every day

c. once in 10 days

d. Once in 14 days

41 / 118

Category: The Mines Rule 1955

41. What shall be the scale of latrines inside underground?

a. 1 seat for every 50 persons

b. 1 seat for every 100 persons

c. As per approval of Chief Inspector

d. As per approval of an Inspector

42 / 118

Category: The Mines Rule 1955

42. The interior walls and ceiling of latrines shall be white washed once at least ?

a. In every quarter

b. In every 4 months

c. In every 6 month

d. Once in a year

43 / 118

Category: The Mines Rule 1955

43. Upto what height, the walls of latrines hall be cement punned?

a. 1.25m

b. 1.5m

c. 1.75m

d. 3m

44 / 118

Category: The Mines Rule 1955

44. What shall be the scale of latrines and urinals?

a. 1 seat for 50 males

b. 1 seat for 50 females

c. Both A and B

d. None of the above

45 / 118

Category: The Mines Rule 1955

45. For how many persons are employed in a mine, drinking water shall be effectively cooled?

a. 50

b. 250

c. 150

d. 100

46 / 118

Category: The Mines Rule 1955

46. The quantity of drinking water to be provided in a mine or a mine or any part thereof shall be on a scale of at least ______ ltrs for every person employed at any one time.

a. 1 litres

b. 5 litres

c. 3 litres

d. 10 litres

47 / 118

Category: The Mines Rule 1955

47. Within how many days, O/A/M shall implement the recommendations of Safety Committee?

a. 7 days

b. 15 days

c. 21 days

d. 30 days

48 / 118

Category: The Mines Rule 1955

48. At what interval safety committee members shall meet?

a. 30

b. 14

c. 7

d. 45

49 / 118

Category: The Mines Rule 1955

49. Which of the following shall be the function of the safety committee?

a. To discuss remedial measures about unsafe condition

b. To discuss about the report of inquiry into accident

c. To formulate and implement appropriate safety campaign

d. All of the above

50 / 118

Category: The Mines Rule 1955

50. Total how many persons will be there in the safety committee?

a. 3

b. 5

c. 10

d. 12

51 / 118

Category: The Mines Rule 1955

51. Safety committee shall be constituted by O/A/M, if how many persons are ordinarily employed in that mine?

a. More than 50

b. More than 100

c. More than 150

d. More than 500

52 / 118

Category: The Mines Rule 1955

52. The safety committee un der Mines Rules 1955, shall be constituted by whom?

a. Chief Inspector

b. Manager

c. Owner, Agent and Manager

d. None of the above

53 / 118

Category: The Mines Rule 1955

53. Within how many days, O/A/M shall take action on the report of Workmen's inspector?

a. 7 days

b. 15 days

c. 21 days

d. 30 days

54 / 118

Category: The Mines Rule 1955

54. In which form, Workmen's inspector shall record his inspection report and observation?

a. Form T

b. Form U

c. Form V

d. Form M

55 / 118

Category: The Mines Rule 1955

55. Which of the following shall not be the duty of a Workmen's inspector?

a. To inspect all shafts, inclines, roads, workplaces and equipment

b. To inspect the place of danger or in the case of urgency

c. Food quality in canteen

d. To inspect HEMMs/ machineries working inside the mine

56 / 118

Category: The Mines Rule 1955

56. A workmen's inspector nominated under rule 29 Q shall hold office for a period of __________ years from the date of his nomination.

a. 1

b. 5

c. 2

d. 3

57 / 118

Category: The Mines Rule 1955

57. Who shall afford all the reasonable facilities to Wormen's inspector making entries, inspection, measurement, examination etc?

a. Chief Inspector

b. DGMS

c. Owner

d. RI

58 / 118

Category: The Mines Rule 1955

58. In a week, how many days the workmen's inspector shall perform his duties as a Workmen's inspector?

a. 2 days

b. 1 day

c. 3 days

d. 4 days

59 / 118

Category: The Mines Rule 1955

59. How many lectures of training is required for a Workmen's inspector?

a. 20 lectures, 1 hour each

b. 30 lectures, 1 hour each

c. 30 lectures, 2 hours each

d. 21 lectures, 2 hour each

60 / 118

Category: The Mines Rule 1955

60. How many years of experience are needed in that particular mine where a person shall be designated as a Workmen's inspector?

a. 1 year

b. 2 years

c. 3 years

d. 4 years

61 / 118

Category: The Mines Rule 1955

61. How many years of experience in mines is required to be a workmen's inspector?

a. 5

b. 3

c. 1

d. 2

62 / 118

Category: The Mines Rule 1955

62. No person shall act as a workmen's inspector of a mine unless- he possess an _____________ certificate

a. First class manager's competency certificate

b. Second class manager's competency certificate

c. Overman's or foreman's certificate

d. Workmen inspector's certificate

63 / 118

Category: The Mines Rule 1955

63. For which of the following, workmen's inspector shall not be designated??

a. Electrical

b. Land use pattern

c. Mechanical

d. Mining operation

64 / 118

Category: The Mines Rule 1955

64. If in a mine the total no of ordinarily employed persons are 2500 then how many workmen's inspector shall be designated in that mine?

a. 4

b. 5

c. 6

d. 7

65 / 118

Category: The Mines Rule 1955

65. If in a mine the no of ordinarily employed persons are 1400, then how many workmen's inspector shall be designated?

a. 2

b. 3

c. 5

d. 7

66 / 118

Category: The Mines Rule 1955

66. Consultation shall be done with whom, before designating Workmen's inspector by O/A/M?

a. Registered trade union

b. All the trade unions linked with that mine

c. The most representative union

d. Both A and C

67 / 118

Category: The Mines Rule 1955

67. For how many persons are ordinarily employed in a mine, Workmen's inspector shall be designated in that mine?

a. 100

b. 150

c. 250

d. 500

68 / 118

Category: The Mines Rule 1955

68. Details of Workmen's inspector is mentioned in which rule of Mines Rules 1955?

a. 29Q

b. 43

c. 29J

d. 36 B

69 / 118

Category: The Mines Rule 1955

69. If a mine is abandoned or discontinued for a period of more than sixty days or if ownership has been changed, then when the annual return of medical examination/ re-examination shall be submitted?

a. 30 days after abandonment and ownership change

b. Within 90 days of discontinuance

c. Both A and B

d. On or before 20th Feb every year

70 / 118

Category: The Mines Rule 1955

70. Annual return of medical examination/re-examination and other details shall be filled in which form and when is it to be sent to the Chief Inspector?

a. Form T; on or before 20th Feb

b. Form P; on or before 20th Apr

c. Form T; on or before 31st Mar

d. Form S; on or before 31st Dec

71 / 118

Category: The Mines Rule 1955

71. Cost of medical examination shall be borne by?

a. Owner

b. Manager

c. DGMS

d. Himself

72 / 118

Category: The Mines Rule 1955

72. When Workmen's Compensation Act was formed?

a. 1890

b. 1927

c. 1963

d. 1923

73 / 118

Category: The Mines Rule 1955

73. Medical certificate of re-examination done by appellate medical board shall be filled in which form?

a. Form Q

b. Form R

c. Form S

d. Form T

74 / 118

Category: The Mines Rule 1955

74. Medical re-examination of appellant shall be done according to which standard?

a. Form PI

b. Form IV of schedule 2

c. Schedule II

d. IS standard

75 / 118

Category: The Mines Rule 1955

75. How many medical officers shall be there in the appellate medical board?

a. 5

b. 2

c. 3

d. 4

76 / 118

Category: The Mines Rule 1955

76. In which rule Constitute of medical appellate board, is mentioned?

a. 29 J

b. 29 K

c. 29 L

d. 29 P

77 / 118

Category: The Mines Rule 1955

77. Medical re-examination of a person who appealed for the re0examination, shall be done by-

a. Appellate Medical Board

b. Medical Surgeon

c. Board constituted by mine manager

d. Any medical practitioner

78 / 118

Category: The Mines Rule 1955

78. In which form the manager shall give notice to appellant of medical re-examination?

a. Form P

b. Form Q

c. Form S

d. Form O

79 / 118

Category: The Mines Rule 1955

79. Before how many days, manager shall give notice to appellant of medical re-examination under rule 29 J?

a. 15 days

b. 30 days

c. 3 days

d. 7 days

80 / 118

Category: The Mines Rule 1955

80. Within how many days, the manager shall arrange for a medical re-examination of a person who has appealed under rule 29 J?

a. 7 days

b. 10 days

c. 14 days

d. 30 days

81 / 118

Category: The Mines Rule 1955

81. Within how many days, a medical re-examination appeal can be done by a person?

a. 7 days

b. 14 days

c. 30 days

d. 45 days

82 / 118

Category: The Mines Rule 1955

82. What shall be the period of retention for medical certificates of persons employed in a mine?

a. 5 years

b. 10 years

c. 3 years

d. 1 year

83 / 118

Category: The Mines Rule 1955

83. Copy of the medical certificate shall be mentioned in which form?

a. Form R

b. Form Q

c. Form P

d. Form O

84 / 118

Category: The Mines Rule 1955

84. Which standard shall be followed for IME or PME?

a. Standard laid down by certifying surgeon

b. Standard laid down in Form P

c. Standard laid down by medical practitioner

d. Indian Standard (IS standard)

85 / 118

Category: The Mines Rule 1955

85. Within how many days the Chief Inspector shall be liable to give his decision if any dispute arises from mine management reading the PME of person?

a. 60 days

b. 30 days

c. 14 days

d. 7 days

86 / 118

Category: The Mines Rule 1955

86. In case of any dispute in between the mine management and the person employed, the same shall be referred to whom?

a. Owner

b. Medical surgeon

c. Chief Inspector

d. Central Govt

87 / 118

Category: The Mines Rule 1955

87. What shall be done if a person fails to submit himself for medical examination even after two consecutive notice as per the guidelines under The Mines Rules 1955?

a. A third notice shall be issued to him

b. He shall be discharge from service

c. Warning letter shall be issued

d. None of of the above

88 / 118

Category: The Mines Rule 1955

88. A person who fails to submit himself for medical examination shall be given a second notice of minimum period of _________ days in form ______.

a. 14 days; form P

b. 7 days; form Q

c. 10 days; form P

d. 10 days; form N

89 / 118

Category: The Mines Rule 1955

89. Notice of medical examination by mine manager shall be given in which form?

a. Form K

b. Form M

c. Form P

d. Form O

90 / 118

Category: The Mines Rule 1955

90. In respect of any medical examination under Rule 29B, the manager of a mine shall give at least _________ days prior notice inw writing to the person.

a. 20 days

b. 30 days

c. 14 days

d. 45 days

91 / 118

Category: The Mines Rule 1955

91. The medical examination under IME or PME shall be carried out by a medical officer appointed by ?

a. Central Govt

b. DGMS

c. Owner

d. None of the above

92 / 118

Category: The Mines Rule 1955

92. All the test reports of PME shall be recorded in which form?

a. Form P

b. Form Q

c. Form P2

d. Form R

93 / 118

Category: The Mines Rule 1955

93. In case of an asbestos mine, at what interval X-ray examination shall be done for the persons employed in the mine?

a. 3 years

b. 5 years

c. 12 months

d. 24 months

94 / 118

Category: The Mines Rule 1955

94. In the case of asbestos mines, what shall be the interval for PME?

a. 1 year

b. 2 years

c. 3 years

d. 4 years

95 / 118

Category: The Mines Rule 1955

95. At what interval, periodical medical examination(PME) shall be done for a person employed in a mine?

a. 3 years

b. 5 years

c. 1 year

d. 5 months

96 / 118

Category: The Mines Rule 1955

96. For the initial medical examination of every person seeking employment in a mine, unless such person has already undergone within the preceding ______ years a medical examination under the guideline of The Mines Rules 1955 while employment at another mine.

a. 2

b. 3

c. 4

d. 5

97 / 118

Category: The Mines Rule 1955

97. In which of the following cases, medical examination shall not be applied?

a. Owner, Agent and Manager

b. Certifying surgeon

c. Any person who are employed purely on temporarily basis for continuous period of not exceeding 6 months

d. Any person who has been temporarily employed irrespective of his employment tenure

98 / 118

Category: The Mines Rule 1955

98. If any person sent up for medical examination in pursuance of sec 43 is not certified to be fit by the certifying surgeon he shall not without the permission in writing of an inspector be sent for another medical examination unless a period of ____________ months has elapsedfrom the time when he was last sent up for medical examination.

a. 6 months

b. 3 months

c. 1 month

d. None of the above

99 / 118

Category: The Mines Rule 1955

99. If a court of inquiry finds, the accident was due to the carelessness or negligence of mine management then from where the expenses shall be recovered

a. Central Govt

b. Owner

c. Manager

d. Can be decided mutually

100 / 118

Category: The Mines Rule 1955

100. Court of enquiry is mentioned in which rule of The Mines Rules 1955?

a. 21

b. 22

c. 23

d. 24

101 / 118

Category: The Mines Rule 1955

101. Who shall circulate the minutes of the meeting done amongst committee members?

a. Chairman

b. Secretary

c. Any member

d. Any inspector

102 / 118

Category: The Mines Rule 1955

102. At any meetings amongst Committee, in which less than 4 members are present, the chairman may adjourn the meeting to a date not less than?

a. 14 days later

b. 21 days later

c. 30 days later

d. None of the above

103 / 118

Category: The Mines Rule 1955

103. No business shall be transacted at a meeting of the committee unless at least ________ members including the chairman are present.

a. 2

b. 3

c. 4

d. 5

104 / 118

Category: The Mines Rule 1955

104. For Notice of meeting amongst the committee members, the secretary to the committee shall give at least ______ days notice to every members.

a. 3 days

b. 7 days

c. 10 days

d. 14 days

105 / 118

Category: The Mines Rule 1955

105. For how long a member of the Committee under rule 4 of mInes Rules 1955, can be absent from India?

a. 3 months

b. 6 months

c. 1 year

d. 3 year

106 / 118

Category: The Mines Rule 1955

106. What shall be the expiry period of the resignation given by any member of the Committee under rule no 4 of Mines Rules 1955?

a. 10 days

b. 14 days

c. 30 days

d. 60 days

107 / 118

Category: The Mines Rule 1955

107. Who shall nominate the secretary of the committee under rule no 4 of Mines Rules 1955?

a. Regional Inspector

b. Mine Manager

c. Owner, Agent and Manager

d. Chief Inspector

108 / 118

Category: The Mines Rule 1955

108. What shall be the terms of office for the committee under rule 3 of Mines Rules 1955?

a. 3 years

b. 6 months

c. 5 years

d. 1 year

109 / 118

Category: The Mines Rule 1955

109. How "ordinarily employed" is calculated?

a. dividing the number of man-days worked by number number of working days including rest days and other non working days

b. dividing the number of man-days worked by number number of working days excluding rest days and other non working days

c. dividing the number of calendar-days worked by number number of working days excluding rest days and other non working days

d. dividing the number of man-days worked by number number of working days excluding weekly offs

110 / 118

Category: The Mines Rule 1955

110. Ordinarily employed means?

a. Average no of persons employed per day

b. Total no of persons employed per day

c. Average no of persons employed per year

d. Total no of persons employed per year

111 / 118

Category: The Mines Rule 1955

111. Officer-inc-charge-canteen means?

a. Any person other than manager

b. Any person other than the manager who is a HR person

c. Any person other than the manager for securing compliance with the provisions of canteen

d. None of the above

112 / 118

Category: The Mines Rule 1955

112. Who is a certifying surgeon?

a. Qualified MBBS appointed by Mining industry

b. Qualified MD appointed by DGMS

c. Qualified medical practitioner appointed by medical board

d. Qualified medical practitioner appointed to be a certifying surgeon

113 / 118

Category: The Mines Rule 1955

113. Who is a manager and appointed by whom?

a. Mine superintendent and appointed by Central govt

b. Mine superintendent and appointed by O/A/M

c. Mine Manager and appointed by Owner

d. Mine superintendent and appointed by mining industry

114 / 118

Category: The Mines Rule 1955

114. Form means?

a. a form as given in the first schedule

b. a form as given in the second schedule

c. a form as given in the mines rule 1955

d. a form as given in the mines act 1952

115 / 118

Category: The Mines Rule 1955

115. Court of enquiry is mentioned in which section of the Mines Act 1952?

a. 23

b. 47

c. 24

d. 66

116 / 118

Category: The Mines Rule 1955

116. In which mines, The Mines Rules 1955 is applicable?

a. In all the mines where mines act applies

b. In Coal and Metal mines only

c. In major mineral mines

d. None of the above

117 / 118

Category: The Mines Rule 1955

117. In exercise of the powers conferred by section ________ of the Mines Act, 1952, the central gove has made Mines rule 1955?

a. 56

b. 57

c. 58

d. 59

118 / 118

Category: The Mines Rule 1955

118. Under which section of the Mines Act 1952, The Mines Rules 1955 has been made?

a. 56

b. 57

c. 58

d. 59

Your score is

The average score is 3%

Created on October 05, 2021 By

AVIJIT

MMR 1961: Q & A

A total of 365 question and answers are there in this quize.

1 / 321

Metalliferous Mines Regulation 1961 came into force for which mines? {Regulations - 1}

(a) Metal Mines

(b) Oil Mines

(d) None of these

2 / 321

Metal Mines Regulation 1961 came into force under which section of the Mines Act 1952 ? {Reg.- 1}

(a) Section58

(b) Section57

(d) Section61

3 / 321

Approved Safety Lamp and Safety Torch are Approved by whom? {reg. - 2}

(a) Chief Inspector

(b) Regional Inspector

(d) General Manager

4 / 321

Assistant Manager does the following work? { reg. - 2}

(a) Control

(b) Management

(d) All of these

5 / 321

What is Auxillary Fan? {reg. - 2 }

(a) Forcing Fan

(b) Exhaust Fan

(d) None of these

6 / 321

Where the banksman is appointed?

(a) Top of the shaft and Winze

(b) Lower of the shaft

(d) None of these

7 / 321

Where the bellman is appointed?

(a) Lower of the shaft and Winze

(b) District

(d) None of these

8 / 321

As per MMR 1961, Blaster comes under which category? { reg. - 2}

(a) Blasting person

(b) Official Person

(d) Competent Person

9 / 321

What should be the minimum age of a competent person? { reg. - 2}

(a) 18 Years

(b)20 Years

(d)30 Years

10 / 321

Which Act should you refer to, when the term 'Explosive' comes into the picture? { reg. -2 }

(a) Indian Explosive Act 1884

(b) Indian Explosive Act 1947

(d) The Mines Act 1952

11 / 321

Face Means ? {Reg. - 2}

(a) Moving Front

(b) Inbye end

(d) All of these

12 / 321

Landing Means ? {Reg. - 2}

(a) Floor and Platform, a place to stop in a Shoft and Winze

(b) Cage and Conveyance stopping place

(d) None of these

13 / 321

Manager means a person appointed under which section of the Mines Act 1952?

(a) Section17

(b) Section 18

(d) Section 20

14 / 321

The manager is appointed by whome?

(a) Owner

(b) Agent

(d) Any mining organization

15 / 321

Duties of a mine foreman, as per MMR? {reg. - 2}

(a) Supervisor

(b) Control

(d.) None Of These

16 / 321

Misfire Means ? { Reg. - 2}

failure to explode of half of the charge of explosives in a shot-hole

failure to explode of an entire charge of explosives in a shot-hole

failure to explode of an entire charge of explosives in a entire blast

Failure of blast

17 / 321

Permitted Explosives are approved by? {reg. - 2}

(a) Chief Inspector

(b) Manager

(d) IBM

18 / 321

Quarter Means ? {Reg. - 2}

period of three months ending on the 31st March, 30th June, 30th September or 31st December

period of three months ending on the 31st Jan, 30th Apr, 30th July or 31st October

period of three months irrespective of starting and ending date

period of three months ending on the 1st March, 1st June, 1st September or 1st December

19 / 321

Railway Means given by the Indian Railway Act _ _ _ _ _ _ _ _? {reg. - 2}

(a) Indian Railway Act 1980

(b) Indian Railway Act 1890

(d) None of these

20 / 321

Regional Inspector Means ? {Reg. - 2}

Who is appointed for the regional area and Local area.

Who is appointed for the regional area only

Who is appointed for Local area only

Appointed and approved by Chief Inspector irrespective area

21 / 321

A shot-hole or part of a shot-hole remaining after being charged with explosive and blasted, which is not a misfired shothole is called?

(a) Pull

(b) Socket

(d) Blast hole

22 / 321

Winze Means ?

a small shaft, either vertical or inclined, in the workings belowground;

a small vertical shaft, in the workings belowground;

a small inclined shaft, in the workings belowground;

Raise bore

23 / 321

Raise Means ? {Reg.- 2}

inclined winze

a small vertical shaft, in the workings belowground;

a small shaft, either vertical or inclined, in the workings belowground;

a small inclined shaft, in the workings belowground;

24 / 321

Notice of Opening is mentioned in Which Regulation ?

(a) Regulation 3.

(b) Regulation 4

(d) Regulation 6

25 / 321

In which form Notice of Opening to be sent by the Manager to the Chief Inspector or to the Regional Inspector? {reg. - 3}

(a) Form - 1

(b) Form – 2.

(d) Form - 3

26 / 321

If any changes are made in the Mine Boundary then, then within how many days, the manager shall give the notice to the Regional Inspector?
{reg. - 3}

(a) 3 Day

(b) 30 Day.

(d) 7 Day

27 / 321

After opening a mine, within how many days should be reported to the regional inspector and chief inspector? {reg. - 3}

(a) As soon as possible

(b) Immediately

(d) Within 7 days

28 / 321

The notice of opening to be sent to whom by the O/A/M? {reg. - 3}

(a) Chief Inspector.

(b) Regional Inspector

(d) District magistrate

29 / 321

When will the Manager, Owner, Agent give notice of Quarterly Return?
{reg. - 4}

20th day of January, April, July, and October in every year,

1st day of January, April, July, and October in every year,

15th day of January, April, July, and October in every year,

30th day of January, April, July, and October in every year,

30 / 321

In which form, are the Quarterly Returns to be sent? { reg. - 4}

(a) 1st Schedule - Form D

(b) Form III

(d) Form - IV

31 / 321

In which form the Annual Returns is filled? {reg. - 4}

(a) Form 1st

(b) Form 3rd

(d) Form 4th

32 / 321

On which date the Annual return is to be filed by the O/A/M? {reg. - 4}

(a) Every year on or before 20 February

(b) Every year on or before 1 January

(d) None of these

33 / 321

If a change occurs in the ownership of a mine, the annual returns required under MMR shall be submitted within how many days {reg. - 5}

(a) 7 Day

(b) 14 Day

(d) 60 Day

34 / 321

If a mine is abandoned or working thereof is discontinued for a period exceeding 60 days, then within how many days annual return to be filed? {reg. - 5}

(a) 30 Day

(b) 60 Day

(d) 120 Day

35 / 321

When it is intended to abandon a mine or to discontinue working thereof for a period exceeding four months, the owner, agent or manager shall, not less than _________days before such abandonment or discontinuance, {reg. - 6}

(a) before 30 days

(b) after 30 days

(d) after 60 days

36 / 321

When, on account of unforeseen circumstances, a mine or part as aforesaid is abandoned or discontinued before the notice has been given or when without previous intention the discontinuance extends beyond a period of four months, the notice shall be given forthwith.

(a) forthwith

(b) within 24 hours

(d) within 7 days

37 / 321

Notice of abandonment shall be given in which form? { reg. - 6}

(a) Form - I

(b) Form – I first schedule

(d) Form - II first schedule

38 / 321

Within how many days' notice of reopening a mine by Owner, Agent or manager shall be given to CI, RI, DM? {Reg.- 7}

(a) 7 Day

(b) 14 Day

(d) 60 Day

39 / 321

Notice of Re-Opening is mentioned in which Regulation? { Reg. - 7}

(a) Regulation - 7

(b) Regulation – 8.

(d) None of these

40 / 321

In which form notice of reopening shall be given? {reg. -7}

(a) First Schedule - Form - 1

(b) form – II.

(d) Form - IV

41 / 321

Within how many days, a notice to be given to CI or RI for the change in the address of owner? {reg. - 8}

(a) 60 Days

(b) 30 Days

(d) 7 Days

42 / 321

In which form change in the address of the owner to be submitted? {reg. - 8}

(a) Form - I

(b) Form – II

(d) Form - IV

43 / 321

Appointment of Agent is mentioned in which Regulation ?

(a) Regulation - 7A

(b) Regulation - 7

(d) Regulation - 8

44 / 321

Notice of Accident is mentioned in which Regulation ?

(a) Regulation - 9

(b) Regulation – 10.

(d) None of these

45 / 321

Notice of Diseases is mentioned in which Regulation? {Reg. - 10}

(a) Regulation - 8

(b) Regulation - 9

(d) Regulation - 13

46 / 321

Where any person employed in a mine contracts any disease notified by the Central Government in the Official Gazette, the owner, agent or manager shall, within ______days of his being informed of the disease, send notice to proper authority?

(a) 24 Hours

(b) 3 Days

(d) 14 Day

47 / 321

The notice of diseases to be given in form ________ and to whom?

(a) Form - 1; district magistrate

(b) Form – II; DM, CI and RI

(d) Form - IV; CI and RI

48 / 321

Notice of accident to be given within how many days?

(a) 30 Day

(b) 14 Day

(d) 1 day

49 / 321

For how many days, the notice of accident copy to be kept on the notice board outside mining office? {Reg.- 9}

(a) 7 Day

(b) 14 Day.

(d) 30 Day

50 / 321

Notice of accident to be given in which form? {reg. - 9}

(a) Form - IV

(b) form - IV A

(d) Form – II

51 / 321

In respect of every person killed or injured as above, the owner, agent or manager shall send to the Chief Inspector particulars in Form IV-B and IV-C of First Schedule, within ___ days of the occurrence or _____ days of the injured person returning to duty, as the case may be. {Reg.- 9}

(a) 30 days; 7 days

(b) 14 days; 7 days

(d) 3 days; 7 days

52 / 321

Which one of the following is not covered int he definition of accident in regulation 9 (reg9)

(a) premature collapse

(b) irruption of water

(d) Missfire of shot hole

53 / 321

The chairman of the mining board shall be {reg. - 11}

(a) manager

(b) general manager

(d) regional inspector

54 / 321

How many members will be there in the Board of Mining examination? {Reg. - 11}

(a) 5

(b) 6

(d) 10

55 / 321

The members of the Mining Examination Board shall have a term of{ Reg. - 11}

(a) 1 year

(b) 2 year.

(b) 3 year.

(d) 5 year

56 / 321

Where shall be the location of the meeting of the examination board and how many days' prior notice to be given to the members? {Reg.-11}

(a) in Regional office; 5 days

(b) Dhanbad; 10 days

(d) Dhanbad; 30 days

57 / 321

If there is urgency of a meeting of the Mining Board, then how many days' prior notice to be given to the members? { reg. - 11}

(a) 2 days

(b) 3 day

(d) 7 days

58 / 321

No business shall be transacted at a meeting of the Board unless at leat _____ members, including the Chairman, are present. (reg11)

(a) 2

(b) 3

(d) 5

59 / 321

How many members should be present at the Mining Board meeting?
Want. (reg 11)

(a) 3

(b) 5

(d) 10

60 / 321

How many types of certificates are issued by the Mining Board (reg 12)

(a) 3

(b) 5

(d) 10

61 / 321

Notice regarding the date and place of the examinations for the Manager’s and Surveyor’s certificates shall be published, not less than ______ days prior to the date fixed by the Board for receiving applications.

(a) 30 days

(b) 60 days.

(d) 120 days

62 / 321

Minimum age of a person to appear in the exam conducted by the Mining Board
Should be { reg. - 15}

(a) 18 year

(b) 19 year

(d) 25 year

63 / 321

A medical certificate obtained not more than ______year prior to the date of this application for the examination under regulation 13, shall be valid, {Reg.- 15}

(a) 1 year

(b) 2 year.

(d) 5 year

64 / 321

No person shall be admitted as a candidate at any examination for a First or Second Class Manager’s Certificate unless he has the practical experience of ______ and ______ years respectively{reg. - 16}

5 years ; 3 years

3 years ; 2 years

5 years ; 6 years

4 years ; 3 years

65 / 321

In the case of a candidate who has received 5[a diploma or degree in mining or mining engineering or other equivalent qualification, approved in that behalf by the Central Government, the period of experience for first class ad second class shall be _____ years and _____ years, respectively {reg. - 16}

5 and 4

4 and 3

3 and 2

2 and 1

66 / 321

If a student obtained a degree in mining engineering, then how many years' of experience he should have to appear in second class examination? {reg. - 16}

1 year

2 year

3 year

No experience required

67 / 321

In the case of a candidate who has received a certificate, diploma or degree in applied geology, civil, mechanical or electrical engineering, or other equivalent qualification approved in that behalf by the Central Government, then the period of practical experience for first and second class examination shall be __________ years and __________ years, respectively. {reg. - 16}

4 and 5

4 and 2.5

3 and 2.5

2.5 and 5

68 / 321

For an unrestricted first-class and second class mine managers' certificate, how many years of experience do you need in UG {reg. - 16}

36 months and 12 months respectively

24 months and 12 months respectively

15 months and 12 months respectively

18 months and 12 months respectively

69 / 321

No person shall be admitted as a candidate at any examination for a Surveyor’s Certificate unless he has satisfied the Board that he has had not less than _____ year’s practical experience of surveying of a type approved by the Board {reg. - 17}

(a) 1 year

(b) 2 year

(b) 3 year

(d) 5 year

70 / 321

In case of candidate who has received a certificate, diploma or degree in mining or mining engineering, mine surveying, or civil engineering or other equivalent qualification, how many years of experience he needs for unrestricted surveyor's certificate{reg. - 17}

(a) 6 month

(b) 1 year

(d) 3 year

71 / 321

If any person wants to appear in mate or blaster exam then, he should have practical experience of how many years. {reg. - 18}

(a) 1 year

(b) 3 year

(d) 7 year

72 / 321

The practical experience for blaster's certificate shall be reduced to_________years in the case of a candidate who has received a diploma or certificate in mining subjects or other equivalent qualification after a course of at leas two years’ duration approved in that behalf by the Central Government 4[or who received has a degree in applied geology or in civil, mechanical or electrical engineering or other equivalent qualification {reg. - 18}

(a) 1 year

(a) 2 year

(d) 5 year

73 / 321

Mining engineering students to sit in the mate or blaster's exam, at least how many years of experience they should have. {reg. - 18}

(a) 6 month

(b) 1 year

(d) 3 year

74 / 321

Will the requirement of experience in metal mine can be reduced by board if someone has experience in coal?(reg 19)

yes

75 / 321

How many years of experience someone need to appear in an engine driver's examination? {reg. - 20}

(a) 6 month

(b) 1 year

(d) 3 year

76 / 321

Fees for grant of certificate is mentioned in which regulation?

Regulation 19

Regulation 20

Regulation 21

Regulation 22

77 / 321

A person working in a country other than India and has certificate in that country, then how many years of practical training he need in Indian mines to get a manager's certificate? {reg. - 22}

(a) 6 month

(b) 1 year

(d) 3 year

78 / 321

Which regulation has mentioned the provision of Duplicate certificates?

Regulation 25

Regulation 26

Regulation 27

Regulation 28

79 / 321

To whom the certificates of mine foreman, mine mate, engine driver or the blaster will submit his certificate?(reg 27)

(a) Manager

(b) DGMS

(d) IBM

80 / 321

Suspension of a certificate has been mentioned in which regulation?

Reg 26

Reg 27

Reg 28

Reg 29

81 / 321

No person shall act as a manager or an official or a blaster or a winding engine man in a mine after attaining the age of 60 years unless he has obtained, within the preceding _____year, a medical certificate of fitness certifying him fit to carry out the duties prescribed for him

5 years

3 years

2 years

1 year

82 / 321

Qualification of Inspector? {reg. - 32}

First Class Manager Certificate + Degree or diploma in mining engineering

Second Class Manager Certificate + Degree or diploma in mining engineering

First Class Manager Certificate + Degree Only

Second Class Manager Certificate + diploma in mining engineering

83 / 321

Minimum Age of Manager ?{ Reg.- 34}

(a) 18 Years .

(b) 20 Years

(d) 30 Years

84 / 321

The owner or agent shall provide suitable residential accommodation for the manager and the undermanager or assistant manager within a distance of _____ from all mine openings{REG..- 34}

(a) 3 KM .

(b) 3 miles

(d) 5 miles

85 / 321

Can a manager work as an agent/under manager/ assistant manager in another mine? {reg. - 34}

a) Yes

(B) No

86 / 321

No manager shall vacate his office without giving due notice in writing to the owner or agent at least ____ before the day on which he wishes to vacate his office {reg. - 34}

(a) 30 Day

(b) 2 Month

(d) 6 Month

87 / 321

Manager's permit as per reg 5 of 34 is valid up to? {reg. - 34}

(a) 6 Month.

(b) 12 Month

(d) Always valid

88 / 321

If more than 150 Persons are Ordinary Employed in Underground Mines and 400 Person is Employed in all, then the selected manager in that Mines should have ? {reg. - 34}

(a) First Class Manager's Certificate

(b) Second Class Manager Certificate

(d) Mining Mate

89 / 321

If ordinarily employed in a mine is 75 in underground and less than 400 in all, in that case, what certificate is needed for manager? {reg. -
34}

(a) Any certificate is valid

(b) Only Second Class Manager Certificate

(a) First or Second Class Manager Certificate

90 / 321

In every mine the average employment of which exceeds ________in working below ground or ________ in all in the mine, the manager shall be assisted by assistant managers and/or underground managers {Reg.- 35}

450 and 1200

1200 and 450

500 and 1200

600 and 1200

91 / 321

What will be the age of an Engineer to appoint in Mines? {reg. - 36}

(a) 20 Year Or More .

(b) 21 Year.

(d) 23 Year Or More .

92 / 321

Total HP of HEMMs in Open cast mine which calls for an engineer having diploma or degree in mechanical engineering
{reg. - 36}

(a) 650 HP .

(b) 750 HP.

(d) 1250 HP

93 / 321

A notice of every appointment of engineer, giving the name and full particulars of the qualifications and experience of the person so appointed, shall be sent to the Regional Inspector within _____ days of such appointment {reg. - 36}

(a) 7 Day .

(b) 14 Day

(d) 30 Day

94 / 321

Age of Surveyor to appoint in Mines will not be less than _ _ _ _ _ _ ?
{ reg. - 38}

(a) 21 Year

(b) 23 Year.

d) 30 Year

95 / 321

A notice of every surveyor appointment giving the name and full particulars of the qualifications of the person so appointed, shall be sent to the Regional Inspector within ________days of such appointment.{Reg.- 38)

(a) 1 Day

(b) 3 Day

(b) 7 Day

(d) Notice not required as manager is appointing him who is fully authorized to do so

96 / 321

Every person using a safety lamp shall take proper care of it and shall not place it within _____metre of the swing of any tool {Reg.- 41)

(a) 0.3 Meter

(b) 0.5 Meter

d) 1 Meter

97 / 321

Manager shall visit under ground mine to examine at least ________ days in a week
{Reg.- 44}

(a) 1 Day

(b) 2 Day.

(d) 4 Day

98 / 321

Manager shall visit in the night shift at least within how many days {reg. - 44}

(a) 10 days

(b) 15 Days

(d) 45 Day

99 / 321

If there is a shortage of material in the district, within how many days owner or agent shall provide it to the manager? {reg. - 44}

(a) 1 Day

(b) 3 Day

(d) 14 Day

100 / 321

If any incident occurs in a mine, is it the responsibility of mine management to investigate it? if yes, who shall do the investigations and report shall be kept in bound paged book?

Manager

Owner, agent and manager

Agent will assign responsibility

Safety officer

101 / 321

What shall be the frequency of checks by assistant manager or under manager?{reg. - 45}

(a) Every Day

(b) once in 3 days

c) Once in a week

(d) Manager will set frequency

102 / 321

Whose responsibility is this, in the case of working belowground, - while on duty, he will carry a tracing of the workings of such district and shall keep the tracing up-to-date {reg. - 46}

(a) Mine Surveyor

(b) Mining Mate

(d) Mine Manager

103 / 321

It is the primary responsibility of whom to see that all traveling roadways and working places in his district are made and kept secure.
{Reg.- 47}

(a) Mine manager

(b) Forman

(d) Assistant manager

104 / 321

Who has the authority to carry explosive? {reg. - 48}

(a) Blaster

(b) Under manager

(d) Helper

105 / 321

In mechanical ventilators, examining the machinery and observing the pressure-recorded or water gauge and the speed indicator shall be at intervals of not more than _____{Reg.-50}

Every 7 days

Every day

Every 8 Hours

Every 1 Hours

106 / 321

The surveyor shall inform about the full facts when workings of the mine have approached to about ____ metres from the mine boundary, or from disused or waterlogged workings; {reg. - 52}

(a) 60 Meter

(b) 75 Meter

(d) 120 Meter

107 / 321

Duties of Banksmen, Bellmen, and Signal Men are mentioned in which regulation? {reg. - 55}

(a) Regulation 55

(b) Regulation 56

(d) Regulation 58

108 / 321

Indian Explosive Act Formed in

(a) Year 1874

(b) Year 1884.

(d) Year 2010

109 / 321

Within how many hours, persons shall inform his presence to attendance keeper after reaching duty? {Reg.- 59}

half an hour

1 hour

2 hours

3 hours

110 / 321

Every plan or section prepared or submitted shall show a scale of the plan at least _______ centimeters long and suitably subdivided{Reg.- 60}

(a) 10 CM

(b) 25 CM

(d) 50 CM

111 / 321

On what scale, the plan for Mica Mines and Other Small Mines are made?{reg. - 60}

(a) 1: 200

(b) 1: 2000

(d) 1: 5000

112 / 321

On Which Scale, the Plan For Large Opencast Mines are made ? {reg. - 60}

(a) 1 : 5000

(b) 1 : 1000

d) 1 : 4000

113 / 321

On which scale will the plans be made for other mines except large opencast or mica mines ? {reg. - 60}

(a) 1 : 1000

(b) 1 : 2000

(d) 1 : 10000

114 / 321

In how many days will the Mine Plan be updated every? {reg -60}

(a) Every Month

(b) Every 3 Month.

(d) Every Year

115 / 321

In how many days will the plan be updated in Open Cast Mines?{reg. - 60}

(a) Every 3 Month

(b) Every 12 Month.

(d) Every 5 Year

116 / 321

Every important surface feature within the boundaries, such as railway, road, river, stream, watercourse, tank, reservoir, opencast working and building which is within _____ metres of any part of the workings measured on the horizontal plane; shall be shown in plans {reg. - 61}

(a) 60 Meter

(b) 100 Meter

(d) 250 Meter

117 / 321

A vertical mine section or sections showing a vertical projection of the mine workings, where a reef, vein, lode or mineral bed or deposit has an average dip of more than ___ degrees from the horizonta {reg. - 61}

(a) 30 Meter

(b) 60 Meter

(d) 120 Meter

118 / 321

At what intervals the surface contours shall be shown in the case of under ground and in the case where there is no under ground working? {reg. -61}

50 Meter , 100 Meter

500Meter , 100 Meter

10 Meter , 20 Meter

5 Meter , 10 Meter

119 / 321

where different reefs, lodes, veins or mineral beds or deposits overlie or run parallel to one another, the workings or each reef, lode, vein or mineral bed or deposit shall be shown on a separate plan and/or longitudinal section or sections; so however that if two reefs, lodes, veins or mineral beds or deposits are so situated in relation to each other than the parting between workings made therein is less than _________ metres at any place, such workings shall also be shown on a combined plan and/or longitudinal section{reg. - 61}

(a) 10 Meter

(b) 30 Meter.

(d) 100 Meter

120 / 321

The plans required to be kept shall show the workings both above and belowground of all adjacent mines which are situated within ______ metres, measured on any plane, of the boundary claimed by the owners of the mines {reg. - 61}

(a) 200 Meter

(b) 100 Meter

(d) 60 Meter

121 / 321

In the case of dipute, upto how many meters shall be shown on surface plan {reg. - 61}

(a) 60 Meter

(b) 100 Meter

(d) 200 Meter

122 / 321

The owner, agent or manager shall, on or before the ______ of every year, submit to the Chief Inspector two up-to-date copies of the plans and sections{ reg. - 62}

(a) 30 January

(b) 31 March

(d) Don't require, as it is the responsibility of surveyor to do so

123 / 321

Within how many days the plans and sections of abandoned mine shall be sent CI {reg. - 62}

(a) 30 Day

(b) 60 Day

(d) 120 Day

124 / 321

How many means of acess/egress should be there in every mine? { reg. - 68}

(a) 1 Roadway

(b) 2 Roadway.

125 / 321

Suitable arrangements shall be made for persons to descend and ascend by each of such shafts or outlets. Where the shaft is vertical and more than _______metres in depth, such arrangements shall be by means of a proper winding engine.
{ reg. - 68}

(a) More Than 30 Meter

(b) Less Than 60 Meter

(d) 100 Meter

126 / 321

The shafts, inclines or outlets shall not be less than _______metres distant from one another at any point{reg. - 68}

(a) Not Less Than 15 Meter

(b) More Than 15 Meter

(d) More Than 50 Meter

127 / 321

The Hight of Traveling Roadway will be? { reg. - 68}

(a) 1.5 Meter

(b) 1.8 Meter

(d) 3 Meter

128 / 321

What will be the width of the traveling roadway? { reg. - 68}

(a) 1.2 Meter

(a) 1.8 Meter

(d) 1.5 Meter

129 / 321

if the single outlet is an un-walkable shaft (other than a shaft in the course of being sunk) and exceeds _______metres in depth, it shall be provided both with ladders and with other means of raising an lowering persons { reg. 68}

(a) More Than 30 Meter.

(b) Less Than 30 Meter

(d) Less Than 50 Meter

130 / 321

Mine foreman or other competent persons shall examine the shafts or other outlets at what intervals?{ reg. - 72}

(a) Every Day

(b) Every 7 Day

(d) Every 30 Day

131 / 321

Permanent Lining in Shaft and Winze shall be considered for what depth?{ reg. - 69}

(a) More Than 3 Meter

(b) Less Than 15 Meter

(d) Less Than 25 Meter

132 / 321

Every shaft or winze, including shaft or winze in the course of being sunk, which has an inclination exceeding ______ degrees from the horizontal, shall be provided with a ladderway from the top to the bottom

(a) 15 degree

(a) 20 degree

(a) 25 degree

(a) 30 degree

133 / 321

In the case of a shaft or winze in the course of being sunk, the ladderway may be provided within such distance, not exceeding _______ metres, from the bottom as to secure it from danger during blasting operations and a chain or rope ladder shall be provided from this point to the bottom of the shaft or winze

(a) 20 meters

(b) 40 meters

(d) 60 meters

134 / 321

Every ladder used in a mine shall be strong enough and be securely fixed in the shaft, winze or stope at an inclination of not more than ______ degrees from the horizontal

(a) 60° Degree

(b) 80° Degree.

(d) 120° Degree

135 / 321

Where the inclination of ladderways is more than 60 degrees from the horizontal, the platforms or sollars shall be provided at intervals of not more than _____ metres. { Reg.- 75}

(a) 10 Meter

(b) 20 Meter.

(d) 50 Meter

136 / 321

If a ladderway provided exceeds 20 metres in depth and has an inclination of more than 30 degrees with the horizontal, platforms or sollars shall be provided at intervals of not ore than ________ metres along the underlie or slope of the shaft or winze.{ reg. - 75}

(a) 10 Meter

(b) 15 Meter

c) 30 Meter

(d) 50 Meter

137 / 321

Before installation of new winding engine, the O/A/M shall give notice to RI before how many days? {Reg. - 79}

(a) 30 Days

(b) 60 Days

(d) 120 Days

138 / 321

At every mine where a shaft or winze is used for lowering or raising persons, at least ________ spare winding rope, suitable for use in such shaft or winze shall be kept in reserve
{ reg. - 81}

(a) 5 Winding Rope.

(b) 3 Winding Rope

(d) 1 Winding Rope

139 / 321

The Permissible angle of subtent in either direction of winding engine rope in relation to the head gear is? { reg. - 80}

(a) 1.5° Degree .

(b) 2° Degree

(d) 5° Degree

140 / 321

The diameter of the drums or sheaves of the winding engine, and of the pulleys and sheaves used in connection with the winding shall be not less than ________ times of the dia of the rope?

(a) 10

(b) 50

(d) 100

141 / 321

Winding Engine Driver should have the following certificate? { reg. - 78}

Second Class Engine Driver's Certificate

First Class Engine Driver's Certificate

Experience of more than 15 years

Any diploma certificate

142 / 321

There shall be provided one or more brakes on the drum of winding engine for the purpose of ?{ Reg. - 82}

(a) Depth Indicating

(b) Back Stay

. (D) for the purpose of keeping such drum stationary and and for lowering the cage or other means of conveyance

143 / 321

What is not correct regarding the code Of Signal for winding engines in Shaft, Winze etc ? { Reg. - 83}

(a) One Rap - Stop

(b) Two Raps - Lower

(d) Four Raps - Emergency

144 / 321

Where the shaft or winze is vertical and exceeds __________metres in depth, it shall be provided with sufficient number of guides to ensure smooth and safe travel of the cage or other means of conveyance{reg. - 83}

(a) More Than 30 Meter

(b) More Than 45 Meter

(d) More Than 90 Meter

145 / 321

Where the shaft or winze is vertical, the gap, both vertical and horizontal, between the protective roofing and the top of cage, when the cage is at the bottom of the shaft, shall not exceed _____ . { reg. - 83}

(a) Not More Than 15 cm.

(b) Not More Than 15 m

(d) Not More Than 30 m

146 / 321

At what depth of Shaft, provision for speed indicator has been mentioned in regulation 84 of MMR 1961 {reg. - 84

(a) 45 Meter

(b) 50 Meter

(d) 250 Meter

147 / 321

If the shaft or winze exceeds _________metres in depth, there shall be a clear over-run space of not less than _______ metres below the lowest landing place. {reg. - 84}

(a) 300 ; 7.5 Meter

(b) 200 ; 7.5 Meter

(d) 100 ; 12.5 Meter

148 / 321

In case of every shaft or winze exceeding ________ metres in depth, there shall be provded an effective automatic contrivance to prevent overspeeding and overwinding {reg. - 84}

(a) 50 Meter .

(b) 60 Meter

. (d) 150 Meter

149 / 321

Except where an Automatic Contrivance is provided to prevent overwinding, a point shall be fixed and marked on the indicator of the engine in such a way as to show when the cage or other means of conveyance is at a distance of not less than twice the circumference of the drum from the completion of the wind; and if such cage or other means of conveyance contains persons, the winding engineman shall not, as soon as it has reached the point aforesaid, raise it for the remaining distance at a speed exceeding ________ metres per second{ Reg. - 84}

(a) 1.2 M/ Second .

(b) 1.5 M/ Second

(d) 2 M/ Second

150 / 321

Tests of every Automatic Contrivance and every brake shall be made once at least in every ______ days, by raising each cage or other means of conveyance, in turn, to pass the last control point above the topmost landing {Reg.- 84}

(a) 30

(b) 14

(d) 3

151 / 321

The Automatic Contrivance shall prevent the descending cage from being landing at the pit bottom or other permanent landing at a speed exceeding__________ per second {reg. - 84}

1.5m/sec

1.5km/hour

2.5m/sec

3.5m/sec

152 / 321

at any one time in any cage or other means of conveyance shall not exceed _____% of the maximum load { reg. - 84}

(a) 50 % .

(b) 60 %.

(d) 100%

153 / 321

Provisions for Detaching Hook shall be at what depth of shaft? {reg. - 87}

(a) 45 Meter .

(b) 60 Meter.

(d) 100 Meter

154 / 321

When the bucket or other means of conveyance is at the top landing, there shall be a clear over-run space of ? {reg. - 87}

(a) 3 Meter .

(b) 3.6 Meter

(d) 4.5 Meter

155 / 321

When shaft sinking is in progress, overhead protection on each bucket shall be provided and sufficient number of guides shall be kept extended up to how many meters? {reg. - 87}

(a) 15 Meter .

(b) 20 Meter

(d) 35 Meter

156 / 321

The Signaling Apparatus shall be checked or examined at an interval of ? { reg. -88}

(a) Every 24 Hours .

(b) Every 3 Day

(d) Every 14 Day

157 / 321

Before Winding Engine Installation in Mines, O/A/M, from whom will take the permission? {Reg. - 88}

(a) Regional Inspector

(b) Chief Inspector

(d) Coal India

158 / 321

The gap between the floor of cage or other means of conveyance and the lowest part of the gate of fence does not exceed _______ centimetres and that between any two members of the gate or fence does not exceed __________centimetres {reg. - 88}

(a) 15 CM, 20 CM

(b) 30 CM, 20 CM

(d) 25 CM, 20 CM

159 / 321

Beyond what depth of a shaft, the rope shall be made up of cold-drawn steel wire? { reg. - 88}

(a) 15 Meter .

(b) 30 Meter

(d) 60 Meter

160 / 321

The factor of Safety of Winding Rope In Shaft Less Than 300 Meter Deep will be? {Reg- 88}

(a) Less Than 10

(b) More Than 10

(d)Not Less Than 8

161 / 321

Exceeding 300 Meter but Not Exceeding 500 Meter in Depth Of Shaft, Winding Rope's Factor Of Safety shall be? {Reg.- 88}

(a) More Than 9

(b) Less Than 9.

d) Not More Than 9

162 / 321

If the Depth of the shaft Exceeds 500 Meters but Not Exceeding 700, What shall be the FOS of the Winding Rope ? {reg. - 88}

(a) Less Than 8

(b) More Than 8

(d) Note More Than 8

163 / 321

In the Winding Shaft, if the depth of the shaft is more than 700 Meter, but not more than 1000 Meter, the FOS of Winding Rope will be? {reg. - 88}

(a) Less Than 8

(b) More Than 7

(d) Less Than 7

164 / 321

What will be the FOS of the Winding Rope in a shaft deeper than 1500 Meter? {reg. - 88}

(a) Less Than 5 .

(b) More Than 5.

(d) None of these

165 / 321

What shall be the FOS of rope in case of the Winding Shaft having a depth more than 1000 Meters but less than 1500 Meter ? {reg. - 88}

(a) Less Than 5.

(b) More Than 6.

(d) More Than 5

166 / 321

Upto how many years an winding rope can be used in raising and lowering purpose?

(a) 3.5 Year .

(b) 3 Year

167 / 321

If white metal is used in the capping of ropes, up to how much temperature the socket shall be heated before the white metal is poured into it?

(a) 360°C .

(b) 150°C.

(d) 100°C

168 / 321

If white metal is used in the capping of ropes, the melting Point Temperature of White Metal shall not exceed?

(a) 250° C .

(b) 300 ° C

(d) 450° C

169 / 321

At what interval, all the parts of suspension gear shall be renewed? {reg. - 89}

170 / 321

Who can give permission to use suspension gear after 10 years {reg. - 89}

Chief Inspector

Permission not required as its age is 12 years as per regulation

Regional inspector

Owner, Agent or Manager

171 / 321

Every detaching bell or plate used in connection a safety-hook shall be examined, and the opening therein checked by calipers or gauges, once at least in every ______days {reg. - 89}

172 / 321

After every installation or recapping of a rope and after every renewal or refitting of any suspension gear, the engineer shall have made ______ trips up and down the working portion of the shaft, and examine the Cappel to see that they are in proper working order. { reg. - 90}

(a) 2 Times

(b) 5 Times

(d) 10 Times

173 / 321

It's the responsibility of the engineer to check the winding equipment Once at least in every _______hours {reg. - 91}

(a) Every 24 Hours .

(b) Every 48 hours

(d) Every 7 Days

174 / 321

Each winding rope, by passing the rope at a speed not exceeding one meter per second shall be checked by engineer at what interval?

(a) 30 Day .

(b) 21 Day.

(d) 7 Day

175 / 321

Once at least in every 30 days, every winding rope, by passing the rope at a speed not exceeding _____ metre per second

(a) 0.5 Meter / Second.

(b) 1 Meter/Second

(d) 2 Meter/Second

176 / 321

At what interval the internal part of the Winding Engine shall be checked?

(a) Every 3 Month .

(b) Every 6 Month

c) 1 Year

(d) None Of These

177 / 321

After each examination of the Winding Engine, who shall sign the examination report? {reg. - 91}

(a) Always an Engineer.

(b) Either engineer or Manager

(d) Foreman

178 / 321

At every landing where it is necessary for persons to pass from one side of the shaft to the other, an adequate passbye shall be provided for enabling them to do so without entering or crossing the shaft. Every passbye so provided shall be not less than __________metres high and ________metres wide, and shall be kept clear of all obstructions. {reg. - 92}

(a) 1.2 Meter; 1.2 Meter

(b) 1.5 Meter; 1.2 Meter

(d) 1.8 Meter; 1.2 Meter

179 / 321

The distance between Stop block and Runway Switch shall not be more than ------ meter?{Regulation - 95}

(a) 10m.

(b) 20m.

(d) 50m.

180 / 321

Where haulage is effected by one or more ropes, there shall be provided and maintained, tub re-railers at intervals of not more than _______;?
{reg. - 95}

(a) 100m.

(b) 150m.

(d) 500m.

181 / 321

Which is incorrect regarding the Code of Single for men & material haulage?{Regulation - 95}

(a) 1 Rap - Stop

(b) 2 Rap - Lower

(b) 3 Rap - Start

d) 4 Rap - Emergency

182 / 321

Voltage of Electric Signal shall not exceed?

(a.) 30 Volt.

(b.) 45 Volt.

(c.) 60 Volt.

(d.) 75 Volt.

183 / 321

Telephone Signaling Circuit will be?

(a.) Intrinsically Safe

(b.) Flame Proof

(c.) Both (A) and (B)

(d.) All Of These

184 / 321

Manholes shall be provided at an interval of? (Reg-95)

(A) 5 M.

(B) 10 M.

(D) 50M.

185 / 321

Where the inclination of the road is less than 1In6 of the distance between manholes shall be? (Reg. - 95 )

(A) 5 M.

(B) 10 M

(D) 50 M.

186 / 321

Hight Of Manhole ?

1.2 Meter

1.5 Meter

1.8 Meter

2.5 Meter

187 / 321

What will be the size of a Manhole? (Reg96)

(A) Hight-1.8 M.

(B) Depth-1.2 M.

(D) All Of These

188 / 321

Every manhole shall be kept clean and clear of obstruction, and white washed both inside and for a distance of not less than ____ metres around the aperture {Regulation - 95}

(a) 0.25m.

(b) 0.3m.

(d) 1.2m.

189 / 321

For any changes in man hole, the mine management shall take permission from whom ?

(a.) Regional Inspector

(b.) Chief Inspector

(c.) Manager

(d.) None Of These

190 / 321

The hight of the Haulage Roadway shall be?

(a.) 1 Meter

(b.) 1.2 Meter

(c.) 1.5 Meter

(d.) 1.8 Meter

191 / 321

At all places where tubs are coupled or uncoupled, there shall be a clear space of not less than ____metre between, the tubs and one side of the roadway.

(a) 1m.

(b) 1.5m.

(d) 2m

192 / 321

The height of a traveling roadway will not be less than_______Metar?
{Regulations - 96}

(a) 1.5m.

(a) 1.8m.

(d) 2.5m

193 / 321

Where the inclination of travelling roadway exceeds_______ degrees from the horizontal, be provided with suitable steps or ladders; ?

15 degree

25 degree

30 degree

45 degree

194 / 321

where the inclination exceeds 60 degrees from the horizontal, be provided, in addition to the steps or ladders and rails or ropes, with suitable platforms at intervals not exceeding _____ metres measured along the slope. (Reg-96)

(A) 50 M.

(B) 30 M.

(D).10 M.

195 / 321

On every tub there shall be provided and maintained at each coupling end a strong buffer projecting beyond the end and so arranged that when two such tubs are in tandem, the gap between the innermost ends shall not be less than _____ centimeters

(A) 10 Cm

(B) 20 Cm.

(D) 50 Cm

196 / 321

The state of every buffer and drawbar of every tub in use and of every safety-catch, coupling-chain and other attachment shall be examined, once in (Reg-97)

(A) 7 Days.

(B) 14 Days.

(D) 28 Days

197 / 321

Two or more tubs shall not be moved by hand in close succession. Two tubs shall be deemed to be in close succession when the distance between them at any time in less than _______ metres (Reg-97)

2.5m

10m

198 / 321

In traveling roadways, if the gradient is greater than ________ then the step is made with handrail?

45 degree

30 degree

60 degree

25 degree

199 / 321

Re-capping of Haulage Rope is done in how many days?(Reg-99)

(A) 3 month.

(B) 6 month.

(D).12 month

200 / 321

In how many days should the Haulage Track be checked?(Reg-101)

(A) 24 Hours.

(B) 7 Days.

(D) 21Days

201 / 321

Examination of haulage engine, brake-wheel, rope, and other appliances shall be carefully done by a competent person once at least in every?(Reg-101)

(A) 7 Day

(B) 14 Day.

(D) 21Day

202 / 321

) No locomotive shall be used where the gradient of the track exceeds _____. (Reg- 103)

(A) 30 degree

(B) 1 In 10.

(D) 15 degree

203 / 321

) Wherever railway wagons are specially placed so as to afford a thoroughfare, such thoroughfare shall be not less than _____ in width (Reg-104)

(a) 3m.

(b) 5m.

(d) 20m.

204 / 321

No material shall be placed or dumped within ______metres from either side of a track of rails. (Reg-104)

(a) 1.2m.

(b) 1.5m.

(d) 5m.

205 / 321

Locomotive shall be used in mine with the permission of ? (Reg.- 103}

Manager

Chief Inspector

Any inspector

Owner , agent , manager

206 / 321

Haulage road and its every track where the haulage is effected by means of mechanical power of gravity, and every safety contrivance fitted thereon, shall be checked in every (Reg-101)

(A) 24 Hours

(B) 21 Day

(D) 7 Day

207 / 321

On every length of underground roadway in which a conveyor is installed for transporting loads over a distance exceeding ________ metres, there shall be provided and maintained effective means of transmitting signals from every point on the length of the road to the place at which the machinery working the conveyor is operated (Reg- 100)

(A) 15 M.

(B) 30 M.

(D) 100 M

208 / 321

No belt conveyor shall be used in a mine belowground without the permission in writing of the Chief Inspector

True

False

209 / 321

Protection at loading chutes is mentioned in which Regulations?

100

101

210 / 321

Substantial fences and gates shall be provided if any building is situated at a distance of _________m from the haulage road or tramline {Regulation - 105}

(a) 5m.

(b) 20m..

(d) 100m.

211 / 321

During open cast working in alluvial soil, if any insitu pillar is left for measurement, what shall be the height of that pillar
. (Reg-106)

(a) not more than 3.5m.

(b) more than 3m

c) more than 2.5m.

(d) none of these

212 / 321

During open cast working in alluvial soil, if a pillar in insitu is left which has a height of 125m, what shall be its base?(Reg-106)

(a) 1.6m.

(b) 2m.

(d) 5m.

213 / 321

Height of any bench in alluvial soil shall be? {Regulations - 106}

(a) not more than 3.5 m

(b) not more than 3 m.

(d) Not more than 1.5m

214 / 321

What will be the side slope in Manual Open Cast Working in alluvial soil? { reg. - 106}

(a.) Not More Than 45°

(b.) More Than 45 °

(c.) More Than 60 °

d.) More Than 90 °

215 / 321

In the condition of Alluvial Soil, Morum, Gravel, Clay, Debris, permission be taken to increase the gradient from the horizontal by O/A/M from?

Mining Inspector

Indian Bureau of Mines

Regional Inspector

Chief Inspector

216 / 321

Sides, where Float Deposit, and Manually Cutting are being done horizontally, will not be more than _______?

60 °

30 °

40 °

45 °

217 / 321

In the case of hard rock and float-type rock, what shall be the maximum height of the bench?

7.5m

10m

12m

218 / 321

In open cast working in hard rock, where the height of the bench is 7.5 metres, the minimum width of the bench, under the permission fo regional inspector, shall be at least _______ Meter?

7.5 Meter

6 Meter

14 Meter

15 Meter

219 / 321

No tree, loose stone or debris shall unless otherwise permitted in writing by the Chief Inspector be allowed to remain within a distance of _________ metres from the edge or side of any open cast excavation(Reg-106)

(a) 2m.

(b) 3m.

(d) 6m.

220 / 321

Power Of Inspector is mentioned in which Regulations of MMR 1961?

108

118

221 / 321

Before the commencement of work, the O/A/M shall take permission for deep hole blasting and use of HEMM in open cast, from RI and CI before how many days?

60 Days

30 Days

14 Days

7 Days

222 / 321

Without written permission from the Regional Inspector, the height of Main Drive will be not less than ______ Meter.

1.0 Meter

1.8 Meter

2.1 Meter

3.2 Meter

223 / 321

Splitting or reduction of pillar dimension in UG can be done for special purpose by O/A/M, after getting permission from RI, before how many days?

3 Days

7 Days

14 Days

21 Days

224 / 321

If Chief Inspector fond any contravention of any provisions of the Act, rules , regulations or by-laws, during his visit in a mine, in which form he shall enter all the details of contravention?{ reg. - 108A}

(a) form v

(b) form VI

(d) form IV

225 / 321

The register of contravention pointed out by the Chief inspector shall be checked by O/A/M every___ day and shall be countersigned, and a copy of that shall be kept on the notice board for _____ days {reg. - 108A}

1 day and 7 Days

7 days and 14 Days

1 day and 15 Days

14 days and 14 Days

226 / 321

Before working under the Railway Line or Roadway Building, permission shall be taken from? {reg. - 109}

(a) Regional Inspector

(b) Chief Inspector

(d) Manager

227 / 321

If there is a Roadway or railway Line on the Surface, then below it how many meters of Pillar shall be left? {reg. - 109}

(a) 30 Meter

(b) 25 Meter

(d) 45 Meter

228 / 321

For working under railway lines within the specified distance, while taking permission from the chief inspector, how many copies of plan to be submitted?{reg. - 109}

(a) 1 Copy

(b) 2 Copies

(d) 5 Copies

229 / 321

Protective works in abandoned mine shall be done under the permission of? {reg. - 110}

(a) Chief Inspector

(b) Regional Inspector

(d) General Manager

230 / 321

No working shall be made within a distance of __________metres of the boundary of any mine? {reg. - 111}

(a) 3 Meter

(b) 5 Meter

(d) 9 Meter

231 / 321

In case of a disputed boundary, no working shall be made within a distance of ___________metres of the boundary claimed
by the owner of an adjacent mine{reg. - 111}

(a) 3 Meter

(b) 5 Meter

(d) 9 Meter

232 / 321

Who can give permission to work within a distance shorter than 7.5m from the mine boundary? {reg. - 111}

Mine owner

IBM

233 / 321

The Chief Inspector may permit the workings of any mine or part thereof to extend within any shorter distance than 7.5 metres or may require that the said working shall not extend further than a specified distance, not exceeding __________ metres, of such boundary {reg. - 111}

(a) 7.5 Meter

(b) 9 Meter

(d) 60 Meter

234 / 321

In case of steep working, upto ________ degree from the horizontal, shall be permitted to work without seatbelt or lifeline? {reg. - 114}

(a) 45° Degree

(b) 60° Degree.

(d) 100° Degree

235 / 321

Every place in a mine, whether belowground or in opencast working including travelling roadways and landings, where work is carried on or where persons are stationed or required to pass shall be placed under the charge of a _________ {Reg.- 116}

(a) Manager

(b) Foremen

(d) Deputy Surveyor

236 / 321

The mining mate or other competent person accompanied by such assistants as may be required shall, within ____hours before the connection of work in a shift, inspect every part of the mine or district assigned to him, in which persons have to work or pass during the shift{Reg. - 116}

(a) 2 Hours

(b) 4 Hours

(d) 8 Hours

237 / 321

Once at least in every _____ hours, all the road ways and working places shall be inspected by mining mate. {reg. - 116}

(a) 2 Hours

(b) 3 Hours.

(d) 8 Hours

238 / 321

In the case of a shaft in the course of being sunk, who shall be the last person to ascend the shaft at the end of the shift {reg. - 116}

(a) Manager

(b) Foreman

(d) Mining mate

239 / 321

Where several persons are working together in any place, one of them shall be placed as in-charge. What shall be his age?{Reg.- 118}

(a) Minimum 20 Years

(b) Minimum 21 Years

(d) Minimum 30 Years

240 / 321

No person shall carry weight on a road where the gradient is greater than _ _ _ _ _ _ Degree from the horizontal? {reg. - 118}

(a) 30° Degree

(b) 45° Degree

(d) 90° Degree

241 / 321

What shall be the width of a walkway or footpath where there is danger to fall from more than 1.8 m height? {reg. - 118}

(a) 1 Meter

(b) 1.2 Meter.

(d) 1.8 Meter

242 / 321

Level steps shall be provided on walkway/footpath if the inclination is more than? {reg. - 118}

35°

15°

05°

25°

243 / 321

Where the Traveling Roadway is more than 15° Degree from Horizontal What will be the size of the step? {reg. - 118}

Height - 0.20 Meter & Width - 0.35 Meter

Height - 0.50 Meter & Width - 0.35 Meter

Height - 0.20 Meter & Width - 0.25 Meter

Height - 0.30 Meter & Width - 0.35 Meter

244 / 321

Within how many meters of mine entry should all structures be made up of Fire Proof material? {Reg.- 119}

(a) 10 Meter.

(b) 15 Meter

(d) 30 Meter

245 / 321

No person shall light a fire or permit a fire to be lighted on the surface within a distance of ____ metres from any entrance to a mine, except by an order I writing of the manager(Reg- 119)

(a) 10 Meter .

(b) 15 Meter

(d) 60 Meter

246 / 321

Inflammable materials, shall not be stored within a distance of ______metres from any entrance to a mine {Reg.- 119}

(a) 50 Meter

(b) 45 Meter

(d) 15 Meter

247 / 321

Testing of Fire Fighting Equipment i.e. - Fire Extinguisher shall be done by the Competent Person at what interval? {Reg.-121}

(a) 1 Month

(b) 2 Month

(d) 6 Month

248 / 321

At what interval, atmospheric conditions behind the seals of an area of old workings or a fire or spontaneous heating, shall be checked?{Reg.- 123}

(a) 7 Day

(b) 14 Day

(d) 30 Day

249 / 321

At what interval a competent person shall inspect all seals erected to isolate or control a fire or spontaneous heating belowground {Reg.- 123}.

(a) 7 Day.

(b) 14 Day.

(d) 30 Day

250 / 321

A per Reg 123, During every inspection by a competent person, to ascertain the general condition of every seal erected to isolate or control a fire or spontaneous heating belowground, he shall place his signature, with date. This record shall be maintained for how many days?

(a) 1 Month

(b) 2 Month

(d) 6 Month

251 / 321

Suitable birds or other means to detect carbon monoxide, shall be kept ready in a mine, if which regulation is applicable to that mine? (Reg- 122)

(a) 111 and 123

(b) 123 and 142

(d) Only 123

252 / 321

If in a mine 100 persons or more are ordinarily employed then water taps at what interval and what shall be the length of water hoses on those taps? {reg. - 121}

Taps at 60m interval ; hose-pipe length= 100m

Taps at 60m interval ; hose-pipe length= 60m

Taps at 160m interval ; hose-pipe length= 60m

Taps at 120m interval ; hose-pipe length= 60m

253 / 321

For fire fighting, portable water tanks fitted with hand pressure pumps shall be provided in every mine and what shall be the length of hose-pipes fitted with that ? {Reg.- 121}

(a) 60 Meter.

(b) 90 Meter

(d) 150 Meter

254 / 321

Quantity of Dust in Mines during 8 Hours Shift, Shouldn't more than _ per cubic meter?

(a) 2 MG

(b) 3 MG.

(d) 10 MG

255 / 321

Dust should not contain more than _______% of Silica?

(a) 15 %.

(b) 10 %.

(d) 3 %

256 / 321

Generally, survey of Dust in Mines was done at an interval of how many days?

(a) Every Month .

(b) Every 6 Month

(d) 2 Year

257 / 321

The owner, agent or manger of every mine shall, once at least every _____months, cause the air at every workplace where airborne dust is generated to be sampled and the concentration of respirable dust therein determined:?

(a) 1 Months .

(b) 3 Months

(d) 1 Year

258 / 321

Every device used for the prevention and suppression of dust produced by any machinery, equipment or process as also for the filtering of the exhausted air and every dust respirator shall be inspected once at least in every _____days and shall be thoroughly examined and tested at least once in every period of _____ months

7 Days and 3 months.

7 Days and 6 months.

14 Days and 3 months.

14 Days and 6 months.

259 / 321

No plant for the screening or sorting of minerals or ores and as far as practicable, no heap of cinder, cement, sand, mortar or other dry and fine material shall be placed within _____ m. of the top of any down -cast shaft or other intake airway not shall any such material be so handled as to make it air-borne an drawn into such shaft or airway.

(a) 50 Meter

(b) 60 Meter

d) 100 Meter

260 / 321

How many days before commencement of work, O/A/M shall give notice to CI, that is intended or proposed to reopen a mine or part thereof, which has been isolated, sealed off, or flooded with water to deal with a fire or spontaneous heating

(a) 7 Day.

(b) 14 Day

(d) 120 Day

261 / 321

For the precautions againt irruption of gas- Where any working is extended to within how many meters of any stoped-out area likely to contain an accumulation of inflammable/ noxious gases, there shall be maintained at least one bore-hole not less than 1.5 metres in advance of the working. (Reg - 125)

(a) 10 Meter

(b) 30 Meter

c) 90 Meter.

(d) 120 Meter

262 / 321

No working which has approached within a distance of ______metres of any disused or abandoned workings, shall be extended further except with the prior permission in writing of the Chief Inspector(Reg - 128)

(a) 60 Meter

(b) 120 Meter

(d) 200 Meter

263 / 321

When the owner, agent or manager intends or proposes for an intentional flooding, he shall give in writing not less than _______ days’ notice of such intention or proposal to the Chief Inspector

(a) 7 Days.

(b) 10 Days.

(d) 30 Days

264 / 321

After giving the notice to CI, for intentional flooding, by O/A/M, if that is not done within ______ days, then it shall be considered as lapsed and re-notice has to be given

(a) 30 Days

b) 60 Days

(d) 120 Days

265 / 321

Before the construction of a dam, how many days before, the notice shall be given to RI, and if the dam was already constructed then within how many days, the notice shall be given? (Reg-130)

14 Days and one month.

14 Days and 2 months.

14 Days and 3 month.

14 Days and 6 month.

266 / 321

Where to put Fire Extinguishers in a mine as per the provisions of MMR 1961?

(a) Entry Gate

(b) Landing

c) Engine Room.

(d) All Of These

267 / 321

The oxygen percentage in Underground Mines should not be less than? {Reg.- 131}

(a) 17%.

(b) 19%

(d) 20.93%

268 / 321

Permissible Limit Of Carbon Monoxide? {Reg.- 131}

(a) 0.5% .

(b) 1%

(d) 3%

269 / 321

Methan gas in general body of air - (CH4) should not be more than _______ {Reg.- 131}

(a) 1% .

(b) 1.25%

(d) 2 %

270 / 321

Mines in which Main Mechanical Ventilator is used, Air Measurement should be done with an interval of how many days? {reg. -
132}

(A) 15 Day.

(B) 30 Day

(D) 90 Day

271 / 321

At every shaft or winze ordinarily used for lowering or raising of persons or material, where a mechanical ventilator is installed, there shall be provided a properly constructed _______.

Lock-out-tag-out

Guard switch

Door

Air lock

272 / 321

Every stopping between the main intake and main return airways shall be constructed of masonry or brickwork, not less than________centimetres in thickness

(a) 15 CM .

(b) 25 CM

(d) 36 CM

273 / 321

In every mine in which a mechanical ventilator is in use, the quantity of air circulating in every ventilating district shall be measure once at least in every ______ days and recorded in a bound paged book kept for the purpose

(a) 7 Day

(b) 14 Day

(d) 60 Day

274 / 321

Every auxiliary fan shall have an air-duct for conducting the air to or from the face or blind end; and such air-duct shall be so maintained as to minimise any leakage or air and to ensure an adequate supply of air to within _________metres of the face or blind end

(a) 3 Meter.

(b) 4.5 Meter

(d) 15 Meter

275 / 321

The first inspection of a mine or part which is re-opened after a discontinuance of mining operations for a period exceeding ____ days and of any part of amine after being de-watered

(a) 7

(b) 14

(d) 30

276 / 321

CH4 [ Methane Gas] in General body of Air Quantity should not exceed____%? {reg. - 141}

(a) 0.75% .

(b) 1 %

(d) 1.5%

277 / 321

In any part of a mine to which regulations 123(1) and 142 apply, or where the Regional Inspector may require by an order in writing, all unused workings which have not been sealed off, shall once at least in every seven days be inspected by a competent person for the presence of inflammable or noxious gas

(a) 7 Days.

(b) 14 Days

(d) 30 Days

278 / 321

In every mine having workings belowground extending to a depth of more than ____ metres from the surface, determinations shall, once at lest in every 30 days be made of temperature, humidity and such other environmental conditions as the Regional Inspector may by an order in writing stipulate {reg. - 144}

(a) 50 Meter .

(b) 90 Meter.

(d) 150 Meter

279 / 321

In which case the ventilation officer be appointed?

In every Under ground mine

Where Manger thinks necessary

UG mine having extensive workings and if CI stipulates

Depending on criticality of ventilation

280 / 321

Where Lighting arrangement should be donr? {reg. - 146}

(a) Shaft bottom

(b) Open Cast Working

(d) All of these

281 / 321

Adequate general lighting arrangements shall be provided during working hours in every travelling roadway normally used by _______ or more persons during
any shift

(a) 50 Person

(b) 100 Person

(d) 500 Person

282 / 321

Standard of Lighting is mentioned in Which Regulation ?

145

146

147

148

283 / 321

By Manager Assistant Manager, Underground Manager within how many days, will the Flame Safety Lamp be checked once?
{reg. - 149}

(a) Every Day

(b) Every 7 Day.

(d) 30 Day

284 / 321

Precaution to be Taken for Flame Safety Lamp is mentioned in Which Regulation?

150

151

152

153

285 / 321

When was the Indian Explosive Act made?

(a) Year 1884

(b) Year 1957

(d) Year 1997

286 / 321

According to the Indian Explosive Act 1884, Explosive will be kept in? {reg. - 154}

(a) Mine Office

b) Magazine

(d) As per the standing order of manager

287 / 321

No case or container shall contain more than _______ kilogrammes or explosives, and no person shall have in his possession at one time in any place more than one such case or container {reg. - 157}

(a) 5 Kilogram

(b) 10 Kilogram

(d) 25 Kilogram

288 / 321

Where explosive can be stored except magazines? {reg. - 159}

(a) Store room

(b) Reserve Station

(d) At any District

289 / 321

The maximum number of holes that can be blasted by the blaster at a time? {reg. - 160}

(a) 60 Hole

(b) 80 Hole

c) 100 Hole

(d) 120 Hole

290 / 321

No drill shall be used for drilling a shothole unless it allows a clearance of at least _________ centimetre over the diameter
of the cartridge of explosive which it is intended to use (reg162)

(a) 0.3 CM

(b) 0.5 CM

(d) 2 CM

291 / 321

No shothole shall be fired by a fuse less than ____ metres in length

(a) 3.2 Meter

(b) 2.5 Meter

(d) 3 Meter

292 / 321

No person shall re-enter or be permitted to re-enter the place of blasting until __________minutes after the firing of shots

(a) 30 Minute

(b) 1 Hours

(d) 3 Hours

293 / 321

If any hole is blasted electrically, after how much time, a person can enter into the face after the source of electricity disconnects from the
cable?

(a) 3 Minute

(b) 5 Minute

(d) 30 Minute

294 / 321

At what distance a relieving hole shall be drilled if any misfire happens in any hole? {reg. - 167}

(a) 120 CM

(b) 100 CM

(d) 30 CM

295 / 321

Before the commencement of drilling in any working place, the competent person in charge of the place shall see that all looser rock is removed from the face and the area lying within a radius of _________metres of the proposed shothole is thoroughly cleaned or washed down with water and carefully examined for the presence of misfires or sockets

(a) 1 Meter

(b) 2 Meter

(d) 4 Meter

296 / 321

No more than ____holes shall be fired in one round unless they are fired electrically or by means of an igniter cord

(a) 5 Hole

(b) 12 Hole

(d) 25 Hole

297 / 321

At what interval, electrical shotfiring apparatus shall be cleaned and thoroughly overhauled by a competent person? {reg. - 163}

(a) Every Month

(b) Every 2 Month

(d) Every 6 Month

298 / 321

The blaster shall use a well-insulated cable of sufficient length to permit him to take proper shelter, and in no case, shall this cable be less than ________meters in length {reg. - 163}

(a) Not Less Than 20 Meter

(b) More Than 18 Meter

(d) Not Less Than 18

299 / 321

Danger Zone in blasting, Means ? {Reg. - 16}

(a) 300 Meter

(b) 500 Meter

(d) 1 KM

300 / 321

In the case of an opencast working, where any permanent building or structure of permanent nature, not belonging to the owner, lies within the danger zone, the aggregate maximum charge in all the holes fired at one time shall not exceed _____________kilograms

10 kg

02 kg

20 kg

30 kg

301 / 321

Immediately before charging a shothole or a round of shotholes, and again before firing the shots, the blaster shall carefully test for inflammable gas at all places within a radius of ______ metres of the place of firing.

(a) 20 Meter

(b) 25 Meter

(d) 45 Meter

302 / 321

No internal combustion engine or steam boiler shall be used belowground in a mine expect with the permission in writing
of the ___________ {Reg.- 171}

(a) Chief Inspector

(b) General Manager

(d) Coal India

303 / 321

Air Receiver of pressurized apparatus will be tested once in how many days? {reg. -173}

(a) 1 Years

(b) 2 Years

(d) 5 Years

304 / 321

A competent person or persons appointed for the purpose of examining machinery, once at least in every ______days, make a thorough inspection of all machinery and plant in use {Reg.- 176}

(a) 7 Day

(b) 14 Day.

(d) 30 Day

305 / 321

Fencing installed on the surface should be checked in? {reg. - 177}

(a) Every Day

(b) Every 7 Days.

(d) Every 30 Days

306 / 321

Calcium carbide shall not be taken or kept belowground until about to be used, except in a secure metal case or container containing not more than _______ gram in weight{Reg.- 179}

(a) 100g

(b)500g

(d) 1.5 kg

307 / 321

Protective Footwear (Safety shoes) will be given free in an interval of how many days? {reg. - 182}

(a) 3 Years

(b) 1 Year.

(d) 6 Months

308 / 321

Helmet shall be given to the person working in mines in the interval of how many days? {Reg. - 182A)

(a) Every Year

(b) 3 Year

(d) 10 Year

309 / 321

Manpower Distribution Plan is made in? {Reg.- 184}

(a) First Week of Every Month

(b) Second Week of Every Month

(d) First Day of every month

310 / 321

In Which of the Following Cases , Place of Accident Not be Disturbed ? {Reg.- 190}

(a) Fatal Accident

(b) Serious Bodily Injury

(d) None of these

311 / 321

In Mine if an Accident place is not inspected by the by Chief Inspector/Regional inspector/inspector within a time of _ _ _ _ _ _ then work can be started again at that place?

(a) 24 Hours

(b) 48 Hours

(d) 4 Day

312 / 321

Before MMR1961, which MMR was being being followed? {Reg.- 196}

(a) Indian Mettaliferous Mines Regulation 1926

(b) Mysore Gold Mines Regulation 1953

No regulation was made before 1961

313 / 321

If an order made by RI is not acceptable or the mine management thinks is not fit for them, within how many days they can appeal to CI? (Reg.- 194}

(a) 10 Day

(b) 15 Day

(d) 30 Days

314 / 321

In the casse of Appeals to teh mining boards or central govt, against any order of the Chief Inspector an appeal shall lie, within _____days of the receipt of the order by the appellant, to the Committee constituted under section 12 {Reg.- 195}

(a) 20 Day

(b) 30 Day

(d) 60 Day

315 / 321

Notice of Opening / Re - opening / to change ownership is applied in which form ?

(a) from - I

(b) form - II

(d) form - 4

316 / 321

In which form is the Quarterly Return filled?

(a) form -1

(b) form – II

c) form - 3

(d) form - IV

317 / 321

Annual Return for the Year ending on the 31 December is filled in Which form?

(a) form - III

(b) form – 4

(d) form - 6

318 / 321

Notice of Accident is filled and sent to DGMS in Which Form ?

(a) form - IV

(b) form - IV B

(d) form - I first schedule

319 / 321

Particulars of Deceased/ Injured Person Details to be given within 7 days of the incident, in which form?

(a) form - IV A

(b) form - IV B

(d) form - IV D

320 / 321

Particulars of Injured Person Returned to duty To be Separately given, in Respect of Every Person, Within 15 Days of his Return to duty, in Which form ?

(a) form - IV A

(b) form - IV B

(d) form - IV D

321 / 321

Notice of Diseases Notified Under Section 25 shall be given in which form ?

(a) Form - IV

(b) form – 6

(d) form – V

Your score is

The average score is 0%

LinkedIn Facebook VKontakte

Created on October 08, 2021 By

AVIJIT

Mines Vocational Training Rules - 1966

1 / 111

Category: The Vocational training rule 1966

Mines Vocational Training Rules 1966 has made under which section of the Mines Act 1952?

a. (a) Section 58

b. (b) Section 57

c. (c) Section 12

d. (d) Section 60

2 / 111

Category: The Vocational training rule 1966

When did the Mines Vocational Training Rules {MVTR} 1966 come into force?

a. 22 March 1966

b. Null

c. 22 Feb 1966

d. 22 Jan 1966

3 / 111

Category: The Vocational training rule 1966

Where does MVTR 1966 apply?

a. where the Mines Act 1952 applies

b. Null

c. Everywhere

d. only in mines

4 / 111

Category: The Vocational training rule 1966

Under which section of the Mines Act 1952, Manager is decided?

a. (a) Section 17

b. (b) Section 57

c. (c) Section 58

d. (d) Section 60

5 / 111

Category: The Vocational training rule 1966

Is training under MVTR 1966 is applicable to Official Person Like Mining Sardar , Overmen , Under Manager , Manager )?

a. (a) Yes

b. (b) No

6 / 111

Category: The Vocational training rule 1966

6. Training under MVTR 1966 Shall Not be Applied to The Following Person?

a. (a) Timber Men

b. (b) Manager

c. (c) Coal Driller.

d. (d) Track Layers

7 / 111

Category: The Vocational training rule 1966

Person prior to deployment on Surface or in Opencast Mines, According to which schedule training is given?

a. (a) 3rd Schedule

b. (b) 2nd Schedule.

c. (c)1st Schedule

d. (d) 4th Schedule

8 / 111

Category: The Vocational training rule 1966

According to First Schedule- Before Employing in Surface or Open Cast Mines, how many days of training is given to the incompetent person?

a. (a) 3 Days

b. (b) 5 Days

c. (c) 6 Days

d. (d) 7 Days

9 / 111

Category: The Vocational training rule 1966

How many days of Theoretical and Gallery Training will be given to Every Person before working in Underground Mines?

a. (a) 6 Days

b. (b) 12 Days

c. (c) 21 Days

d. (d) 30 Days

10 / 111

Category: The Vocational training rule 1966

10.

According to which schedule- training is given before employment of Every Person (All Persons) in Underground Mines?

a. (a) 1st Schedule

b. (b) 2nd Schedule

c. (c) 3rd Schedule

d. (d) None of these

11 / 111

Category: The Vocational training rule 1966

11. As Per 3rd Schedule of V. T. Rules 1966, Additional Training For Entrants to Gassy Mines Shall be Given For---------------------------- Day ?

a. (a) 7 Days

b. (b) 1 Day

c. (c) 2 Days

d. (d) 3 Days

12 / 111

Category: The Vocational training rule 1966

12. Every person who is already employed in Mines on Surface or Open Cast will be given training as per which schedule before joining Gassy Mines?

a. (a) 3rd Schedule

b. (b) 4th Schedule

c. (c) 6th Schedule

d. (d) None of these

13 / 111

Category: The Vocational training rule 1966

13. According to which schedule training is given to the person working in Underground Mines before employment in Gassy Mines?

a. (a.) 3rd Schedule

b. (b.) 4th Schedule

c. (c.) 5th Schedule

d. (d.) 6th Schedule

14 / 111

Category: The Vocational training rule 1966

14. If a person working in Mines remains absent for 1 year or more, after that he returns to Mines, then according to which schedule training will be given to that person?

a. (a) 7th Schedule

b. (b)5th Schedule

c. (c) 4th Schedule

d. (d) 6thSchedule

15 / 111

Category: The Vocational training rule 1966

15.

How many Lectures will be given as training, to a person for working in Surface or Open Cast Mines as per VT rule 1966 ?

a. 5 Lectures and Demonstration.

b. 3 Lectures and Demonstration.

c. 2 Lectures and Demonstration.

d. 8 Lectures and Demonstration.

16 / 111

Category: The Vocational training rule 1966

16. How many lectures will be given as training to the person working in Gassy Mine ?

a. 6 Lectures and Demonstration

b. 4 Lectures and Demonstration

c. 5 Lectures and Demonstration

d. 8 Lectures and Demonstration

17 / 111

Category: The Vocational training rule 1966

17. According to which schedule, training will be given to the already employed person in Mines?

a. (a) 3rd Schedule

b. (b) 4th Schedule

c. (c) 6th Schedule

d. (d) 8th Schedule

18 / 111

Category: The Vocational training rule 1966

18. According to 4th schedule extra training will be given to the person working in _________ degree mines?

a. (a) 1st Degree.

b. (b) 2nd Degree

c. (c) 3rd Degree

d. (d) None of these

19 / 111

Category: The Vocational training rule 1966

19. According to which schedule training will be given to Timbermen Mistry?

a. (a) Schedule 5th

b. (b) 6th Schedule

c. (c) Schedule 8th

d. (d) 9th Schedule

20 / 111

Category: The Vocational training rule 1966

20. The person working as a Shot-Firer has been absent for 6 months or more. When he or she returns to work, according to which schedule will he or she be given training?

a. (a.) 6th Schedule

b. (b.) 7th Schedule

c. (c.) 8th Schedule

d. (d.) 9th Schedule

21 / 111

Category: The Vocational training rule 1966

21. According to which schedule training will be given to the person working in the post of ShotFirer?

a. 2nd and 4th Schedule

b. 3rd and 5th Schedule

c. 3rd and 6th Schedule

d. 3rd and 4th Schedule

22 / 111

Category: The Vocational training rule 1966

22. According to Schedule 6th, how many lectures of training will be given to the person working in Open Cast Metal Mines?

a. 8 Lectures Training Demonstration

b. 7 Lectures Training Demonstration

c. 4 Lectures Training Demonstration

d. 2 Lectures Training Demonstration

23 / 111

Category: The Vocational training rule 1966

23. Before giving exam to Shotfirer / Blaster {within 3 months} a Person will be given training according to which schedule ?

a. (a.) 7th Schedule.

b. (b.) 8th Schedule

c. (c.) 9th Schedule

d. (d.) 10th Schedule

24 / 111

Category: The Vocational training rule 1966

24. If a person is appointed as Blaster/Shotfirer, within how many days - training will be given to the person as per 7th schedule?

a. (a.) 6 Months

b. (b.) 1 Month

c. (c.) 1 Year

d. (d.) 5 Years

25 / 111

Category: The Vocational training rule 1966

25.

According to which schedule training will be given to the person appearing in the Gas Testing Exam within 3 months of the exam ?

a. (a.) 6th Schedule

b. (b.) 8th Schedule

c. (c.) 10th Schedule

d. (d.) 11 th Schedule

26 / 111

Category: The Vocational training rule 1966

26. Shotfirer engaged in the work of Explosive carrying will be given training as per which schedule?

a. (a.) 13th Schedule

b. (b.) 14th Schedule

c. (d.) 15th Schedule

d. (d.) None Of these

27 / 111

Category: The Vocational training rule 1966

27. The person already working in Explosive Carrying will be given Re-Fresher Training as per Schedule 13 within how many days?

a. (a.) 3 Years

b. (b.) 2 Years

c. (c.) 5 Year

d. (d.) 1 Year

28 / 111

Category: The Vocational training rule 1966

28. Who will be responsible for the Management & maintenance of the training center?

a. Owner, Agent ,Manager

b. VTC Head

c. Safety Head

d. None of them

29 / 111

Category: The Vocational training rule 1966

29. Group Training Center can be made on the written permission of C.I.M {Chief Inspector of Mines}?

a. (a.) Yes

b. (b.) No

30 / 111

Category: The Vocational training rule 1966

30. Without the written permission of the C.I.M {Chief Inspector of Mines} the Manager can not handle the post of Training Officer for ____ days.

a. (a) 90 Days

b. (b) 60 Days

c. (c) 30 Days

d. (d) 6 Month

31 / 111

Category: The Vocational training rule 1966

31. At the interval of ___ days, the Training Officer will give his report to the Agent, Manager, Owner and Chief Inspector of Mines ?

a. (a) 1 Year

b. (b) 2 Year

c. (c) 3 Year

d. (d) 5 Year

32 / 111

Category: The Vocational training rule 1966

32. Will the Trainers be given Training Allowance?

a. (a.) Yes

b. (b.) No

c. May be

33 / 111

Category: The Vocational training rule 1966

33. If a person remains absent in Mines for 1 year or more, then after returning to work, how many hours of lectures will be given?

a. (a.) 2 Hours

b. (b.) 3 Hours

c. (c.) 4 Hours

d. (d.) 6 Hours

34 / 111

Category: The Vocational training rule 1966

34. At least how many days of Practical Training {Lamp Handling} will be given to the person before appearing in the Gas Testing Exam?

a. (a) 1 Day

b. (b) 3 Days

c. (c) 6 Days

d. (d) 7 days

35 / 111

Category: The Vocational training rule 1966

35. In which form- the certificate will be issued after training, to the person working in Non Gassy Mines, Surface or in Open Cast Mines ?

a. (a) Form - F

b. (b) Form – A

c. (c) Form - C

d. (d) Form - D

36 / 111

Category: The Vocational training rule 1966

36. After retraining for Special Department, in which form the certificate is issued ?

a. (a.) Form - B

b. (b.) Form – C.

c. (c.) Form - D

d. (d.) Form - E

37 / 111

Category: The Vocational training rule 1966

37.

Notice of Training Program as per Schedule XII is kept in which form ?

a. (a.) Form - 1

b. (b.) Form – 2.

c. (c.) Form - D

d. (d.) None Of these

38 / 111

Category: The Vocational training rule 1966

38. Certificate of Training for Employment in a Mine Surface /Opencast Mine / Below Ground In Non - Gassy Mine is given in which Form ?

a. (a) Form - A

b. (b) Form - B

c. (c) Form - C

d. (d) Form - D

39 / 111

Category: The Vocational training rule 1966

39. In which form- Certificate Of Re- Fresher Training / Training Of Special Categories Of Workmen is given ?

a. (a) Form - A

b. (b) Form - C

c. (c) Form - B

d. (d) Form - E

40 / 111

Category: The Vocational training rule 1966

40. In which form- the record for Notice Of Opening/Close/Re - Opening/Charge Of Training Center is kept as per Schedule XII ?

a. (a) Form - 8

b. (b) Form - 9

c. (c) Form - 10

d. (d) Form - A

41 / 111

Category: The Vocational training rule 1966

41.

Notice Of Contribution/ Termination Of The Post Of Director for the notice of termination of the post of Training Officer and Director is kept in Record in which Form?

a. (a) Form - D

b. (b) Form C

c. (c.) Form – E

d. (d) Form - 9

42 / 111

Category: The Vocational training rule 1966

42. In which form the record of performance of a person undergoing training, is kept ?

a. (a) Form - 6

b. (b) Form – 7

c. (c) Form - B

d. (d) Form - C

43 / 111

Category: The Vocational training rule 1966

43. In which Form the record of Performance of Trainee is kept?

a. (a) Form - 9

b. (b) Form - 8

c. (c) Form - 7

d. (d) None Of These

44 / 111

Category: The Vocational training rule 1966

44. According to Schedule XII, how many days Basic Training will be given to Track Layers (Line Mistry)?

a. Basic Training - 22

b. Basic Training - 24

c. Basic Training - 25

d. Basic Training - 26

45 / 111

Category: The Vocational training rule 1966

45. How many days of Re-Fresher Training is given to Track Layers (Line Mistry) as per Schedule XII?

a. Re - Fresher Training - 12

b. Null

46 / 111

Category: The Vocational training rule 1966

46. Persons working in Ventilation Bratice Gang, how many days of refresher training will be given to the person ?

a. 3 Days

b. 6 Days

c. 9 Days

d. 10 Days

47 / 111

Category: The Vocational training rule 1966

47. How many days of basic training will be given to the Ventilation Brattice Gang?

a. 10 Days

b. 12 Days

c. 15 Days

d. 18 Days

48 / 111

Category: The Vocational training rule 1966

48. How many days Basic Training will be given to the person working as attendants Of Fan Including Auxillary Fan ?

a. Basic Training - 18 Days

b. Basic Training - 15 Days

c. Basic Training - 28 Days

d. Basic Training - 13 Days

49 / 111

Category: The Vocational training rule 1966

49. How many days Fresher Training will be given to the person working as attendants Of Fan (Pankha Khalasi) Including Auxillary Fan?

a. 6 Days

b. 9 Days

c. 10 Days

d. 12 Days

50 / 111

Category: The Vocational training rule 1966

50. How many days of total training will be given to General Labor (ordinary laborer) ?

a. Basic Training - 10 Days

b. Basic Training - 12 Days

c. Basic Training - 18 Days

d. Basic Training - 15 Days

51 / 111

Category: The Vocational training rule 1966

51. How many days of total re-fresher training will be given to General Labor (ordinary laborer) ?

a. Re - Fresher Training - 3 Days

b. Re - Fresher Training - 6 Days

c. Re - Fresher Training - 8 Days

d. Re - Fresher Training - 9 Days

52 / 111

Category: The Vocational training rule 1966

52. How many days of basic training is given to Tyndals Employed [heavy weight lifting]?

a. Basic Training - 25 Day

b. Basic Training - 28 Day

c. Basic Training - 35 Day

d. Basic Training - 45 Day

53 / 111

Category: The Vocational training rule 1966

53. How many days of refresher training is given to Tyndals [lifting heavy goods] ?

a. 38 Days

b. 18 Days

c. 17 Days

d. 28 Days

54 / 111

Category: The Vocational training rule 1966

54. How many days of training will be given to the Person Employed On Installation, Repair And Maintance Of Machine [Mine repair worker ] ?

a. Basic Training - 22 Days

b. Basic Training - 28 Days

c. Basic Training - 24 Days

d. Basic Training - 14 Days

55 / 111

Category: The Vocational training rule 1966

55. How many days of refresher training is given to the Person Employed On Installation Repair And Maintance Of Re-Fresher to Machine [Mine Repair & Maintenance]?

a. Re - Fresher Training - 12 Day

b. Re - Fresher Training - 22 Day

c. Re - Fresher Training - 32 Day

d. Re - Fresher Training - 42 Day

56 / 111

Category: The Vocational training rule 1966

56. How many days basic training will be given to the person working in Coal Cutting / Drilling Machine Crew ?

a. Basic Training - 26 Day

b. Basic Training - 16 Day

c. Basic Training - 36 Day

d. Basic Training - 39 Day

57 / 111

Category: The Vocational training rule 1966

57. How many days of refresher training is given to the person working in Coal Cutting / Drilling Machine Crew ?

a. Re - Fresher Training - 18 Day

b. Re - Fresher Training - 28 Day

c. Re - Fresher Training - 12 Day

d. Re - Fresher Training - 22 Day

58 / 111

Category: The Vocational training rule 1966

58. For how many days basic training is given to the person working as Attandant of Haulage and Conveyor ?

a. Basic Training - 12 Day

b. Basic Training - 8 Day

c. Basic Training - 14 Day

d. Basic Training - 24 Day

59 / 111

Category: The Vocational training rule 1966

59. How many days of Re-Fresher Training is given to the person working as Attandant Of Haulage and Conveyor ?

a. Re - Fresher - 5 Training

b. Re - Fresher - 12 Training

c. Re - Fresher - 15 Training

d. Re - Fresher - 18 Training

60 / 111

Category: The Vocational training rule 1966

60. According to the Mine Vocation Training Rules, 1966, at least how many days of Re-Fresher Training will be given to the person working in Mines ?

a. 9 Days

b. 10 Days

c. 12 Days

d. 15 Days

61 / 111

Category: The Vocational training rule 1966

61. According to MVTR 1966, at least how many days of basic training will be given to a worker in Mines ?

a. 6 Days

b. 8 Days

c. 18 Days

d. 20 Days

62 / 111

Category: The Vocational training rule 1966

62. At least how many days basic training will be given to the person working in Stowing Gang ?

a. 24 Days

b. 20 Days

c. 44 Days

d. 36 Days

63 / 111

Category: The Vocational training rule 1966

63. How many days Refresher training will be given to the person working in Stowing Gang?

a. 6 Day

b. 10 Day

c. 18 Day

d. 12 Day

64 / 111

Category: The Vocational training rule 1966

64. For how many days basic training will be given to the person engaged in the work of Cleaning / Stone Dust Barrier ?

a. 12 Day

b. 20 Day

c. 14 Day

d. 24 Day

65 / 111

Category: The Vocational training rule 1966

65. How many days of Re-Fresher Training will be given to the people engaged in the work of Cleaning / Stone Dust ?

a. 12 Days

b. 6 Days

c. 8 Days

d. 25 Days

66 / 111

Category: The Vocational training rule 1966

66. How many days of basic training is given to the person before he is engaged in the work of Pick Miner ?

a. 12 Days

b. 24 Days

c. 36 Days

d. 45 Days

67 / 111

Category: The Vocational training rule 1966

67. How many days of Re-Fresher Training is given to the people engaged in the work of Pick Miner ?

a. 12 Days Re- Fresher Training

b. 8 Days Re- Fresher Training

c. 15 Days Re- Fresher Training

d. 18 Days Re- Fresher Training

68 / 111

Category: The Vocational training rule 1966

68. For how many days the person doing the work of Trammer is given Basic training ?

a. 10 Days

b. 13 Days

c. 24 Days

d. 36 Days

69 / 111

Category: The Vocational training rule 1966

69. For how many days Refresher Training is given to Trammer ?

a. 12 Days

b. 15 Days

c. 18 Days

d. 20 Days

70 / 111

Category: The Vocational training rule 1966

70. How many days of basic training is given before the loader is put to work ?

a. 8 Days

b. 24 Days

c. 36 Days

d. 38 Days

71 / 111

Category: The Vocational training rule 1966

71. Person doing the work of Loading activity will be given how many days of Re- Fresher Training ?

a. 9 Days

b. 8 Days

c. 2 Days

d. 12 Days

72 / 111

Category: The Vocational training rule 1966

72. Crane Operator { Including Mobile Craine Operator}- how many days of Basic Training is given to the Person?

a. 24 Days

b. 36 Days

c. 14 Days

d. 12 Days

73 / 111

Category: The Vocational training rule 1966

73. Crane Operator { Including Mobile Craine Operator}- how many days of Re-Fresher Training is given to the Person?

a. 10 Days

b. 8 Days

c. 12 Days

d. 24 Days

74 / 111

Category: The Vocational training rule 1966

74. How many days of Basic Training are given to Drill Operators before they are employed?

a. 36 Day

b. 16 Day

c. 26 Day

d. 24 Day

75 / 111

Category: The Vocational training rule 1966

75. How many days of Re-Fresher Training will be given to Drill Operators ?

a. 6Day

b. 12 Day

c. 8 Day

d. 15 Day

76 / 111

Category: The Vocational training rule 1966

76. How many days Re - Fresher Training is given to Engine Drivers ( Loco Drivers)?

a. 8 Day

b. 12 Day

c. 18 Day

d. 28 Day

77 / 111

Category: The Vocational training rule 1966

77. How many days of basic training is given to Loco Drivers before they are employed ?

a. 36 Day

b. 26 Day

c. 34 Day

d. 30 Day

78 / 111

Category: The Vocational training rule 1966

78. How many days of Basic Training are given to Dozer Operators before they are employed ?

a. 6 Day

b. 36 Day

c. 48 Day

d. 14 Day

79 / 111

Category: The Vocational training rule 1966

79. How many days of Re-Fresher Training is given to Dozer Operators ?

a. 24 Day

b. 12 Day

c. 15 Day

d. 36 Day

80 / 111

Category: The Vocational training rule 1966

80. How many days of Basic training is given to the Loader Operator before he is put to work ?

a. 36 Days

b. 16 Days

c. 22 Days

d. 20 Days

81 / 111

Category: The Vocational training rule 1966

81. How many days of Re-Fresher Training is given to Dozer/ Loader Operator ?

a. 20 Days

b. 18 Days

c. 12 Days

d. 24 Days

82 / 111

Category: The Vocational training rule 1966

82. How many days of Basic Training is given before employing Dumper Operator ?

a. 9 Days

b. 12 Days

c. 36 Days

d. 48 Days

83 / 111

Category: The Vocational training rule 1966

83. How many days of Re-Fresher Training is given to Dumper Operator ?

a. 24 Days

b. 20 Days

c. 18 Days

d. 16 Days

84 / 111

Category: The Vocational training rule 1966

84. How many days of Basic Training is given to Shovel Operator before running a Shovel ?

a. 36 Days

b. 25 Days

c. 30 Days

d. 22 Days

85 / 111

Category: The Vocational training rule 1966

85. For how many days Re-Fresher Training is given to Shovel Operator ?

a. 14 Days

b. 24 Days

c. 28 Days

d. 32 Days

86 / 111

Category: The Vocational training rule 1966

86. How many days of basic training is given to the person working in the Person Employed in Store Room ?

a. 48 Days

b. 25 Days

c. 34 Days

d. 24 Days

87 / 111

Category: The Vocational training rule 1966

87. How many days of Re-Fresher Training is given to the person working in the Material Store Room ?

a. 12 Days

b. 20 Days

c. 18 Days

d. 22 Days

88 / 111

Category: The Vocational training rule 1966

88. How many days of Basic Training is given to a person before employing him in Welding and Gas Cutting work ?

a. 16 Days

b. 8 Days

c. 36 Days

d. 25 Days

89 / 111

Category: The Vocational training rule 1966

89. How many days of Re-Fresher Training is given to the person working in Welding/ Gas Cutting work ?

a. 14 Days

b. 24 Days

c. 20 Days

d. 16 Days

90 / 111

Category: The Vocational training rule 1966

90. How many days of basic training is given to the person before employing him as a Fitter Helper?

a. 36 Day

b. 12 Day

c. 18 Day

d. 30 Day

91 / 111

Category: The Vocational training rule 1966

91. How many days of Re - Fresher Training is given to the person who works as Fitter Helper ?

a. 14 Days

b. 24 Days

c. 30 Days

d. 32 Days

92 / 111

Category: The Vocational training rule 1966

92. How many days of Basic Training is given to the Person before employing him as a Fitter- Electrical ?

a. 70 Days

b. 17 Days

c. 60 Days

d. 80 Days

93 / 111

Category: The Vocational training rule 1966

93. How many days of Re-Fresher Training is given to the person working as Fitter-Electrical, Electrician ?

a. 16 Days

b. 26 Days

c. 20 Days

d. 36 Days

94 / 111

Category: The Vocational training rule 1966

94. According to MVTR 1966, the Vocational Training (VT) of a person is given for how many days ?

a. 12 Days

b. 15 Days

c. 30 Days

d. 40 Days

95 / 111

Category: The Vocational training rule 1966

95. According to MVTR 1966, for how many days first-aid training is given to the person ?

a. 5 Days

b. 7 Days

c. 8 Days

d. 10 Days

96 / 111

Category: The Vocational training rule 1966

96. (96.) According to MVTR 1966, for how many days the training of Gas Testing {Lamp Handling} is given as per Schedule F ?

a. 6 Days

b. None

97 / 111

Category: The Vocational training rule 1966

97. For how many days- Class Room Induction Training is given as per Schedule - D ?

a. 5 Days

b. 8 Days

c. 10 Days

d. 12 Days

98 / 111

Category: The Vocational training rule 1966

98. (98.) Total Training Day Available In Rule - 1966 ?

a. 312 Days

b. None

99 / 111

Category: The Vocational training rule 1966

99. According to Schedule H- for how many days should the Job Training be ?

a. 226 Days

b. 150 Days

c. 90 Days

d. None of the above

100 / 111

Category: The Vocational training rule 1966

100. (100.) Minimum Qualification Of Mining Sardar & Surveyors?

a. 10th and 12th Pass [ Higher Secondary & High School ]

b. None

101 / 111

Category: The Vocational training rule 1966

101. What shall be the qualification of Training Officer ?

a. (a.) Holder of First or Second Class Manager's certificate of competency

b. (b.) Overmen Certificate

c. (c.) Mining Sardar

d. (d.) None Of these

102 / 111

Category: The Vocational training rule 1966

102. Training Officer must have at least how many years of experience in mining?

a. (a.) 1 Year

b. (b.) 5 Years

c. (c.) 10 Years

d. None of the above

103 / 111

Category: The Vocational training rule 1966

103. The instructor should have at least which certificate of competency?

a. 10th Pass, Foremen, Overmen Certificate

b. First class manager's certificate

c. Second class

d. None of the above

104 / 111

Category: The Vocational training rule 1966

104. Training Supervisor should have the following certificate?

a. 10th Pass

b. Second class Manager's certificate

c. First Class Manager's certificate

d. Overmen Or Foremen Certificate

105 / 111

Category: The Vocational training rule 1966

105. Vocational Training (V.T) is given to the person working in Mines at the interval of how many days?

a. (a.) 1 Year

b. (b.) 3 Years

c. (c.) 5 Year

d. (d.) 10 Years

106 / 111

Category: The Vocational training rule 1966

106. The person working in Mines will be given Re-Fresher Training in the gap of how many days?

a. (a.) 1 Year

b. (b.) 3 Years

c. (c.) 5 Years

d. (d.) None Of These

107 / 111

Category: The Vocational training rule 1966

107. Shotfirer, Mining Sardar, Overmen, Support Men, Machine Operator should be given the training of "Gas Testing" in how many days?

a. (a.) 1 Year

b. (b.) 2 Years

c. (c.) 5 Years

d. (d.) 10 Years

108 / 111

Category: The Vocational training rule 1966

108. In a slot, how many people together can be given a training in Vocational Training Center (VTC)?

a. Not More Than 15 Person

b. Not More Than 20 Person

c. Not More Than 100 Person

d. Not More Than 180 Person

109 / 111

Category: The Vocational training rule 1966

109. How much salary should be given to the person doing VTC training ?

a. Full Salary

b. Rs 100 per day

c. Basic pay only

d. None of the above

110 / 111

Category: The Vocational training rule 1966

110. What should be the age of an Instructor Training Officer?

a. More Than 50 Years

b. More Than 20 Years

c. More Than 30 Years

d. More Than 36 Years

111 / 111

Category: The Vocational training rule 1966

111. (111.) Full Form ?

T.O = Training Officer

VTC = Vocational Training Center

CIM = Chief Inspector Of Mines

DMS = Director Of Mines Safety

RIM = Regional Inspector Of Mines

DGMS = Director General Of Mines Safety

a. (a.) Only A & B are correct

b. (b.) only A is correct

c. (c.) All are correct

d. (d.) All are wrong

Your score is

The average score is 3%

LinkedIn Facebook VKontakte

Created on October 06, 2021

Welcome to Mine Crenche Rules 1966 MCQ Questions

1 / 24

1. Under which section of the Crenche Rules 1966, Mines Act - 1952 has been made?

(a) Section - 57

(b) Section - 58

(d) Section - 60

2 / 24

2. When did Crenche Rules - 1966 Formed

come into force?

(a) 1 April 1966

(b) 1 May 1966

(d) None of these

3 / 24

3. 'Crenche Means' women working in Mines Applies to children whose age is?

(a) Under 6 Years

(b) Under 12 Years

(d) None of these

4 / 24

4. According to the Crenche Rule - 1966, who appoints the Medical Officer Incharge in Mines?

(a) Owner of Mines

(b) Agent of Mines

(d) None of these

5 / 24

5. If Coal Mines has 10 or Less Women, will there be Plinth Area of Crench in that Mines?

(a) 27.5 Sq. Meter

(b) 130 Meter

(d) 235 Meter

6 / 24

6. Mines Other than Coal Where 30 Or More Women Currently Employed in that Mines Crench of Minimum Plinth Area in sq. Meter?

(a) 27.5 Meter

(b) 130 Meter

(d) None of these

7 / 24

7. Coal Mines Where 11 to 50 Women Currently Employed What will be Crench Minimum Plinth Area in sq. Meter?

(a) 20.5 Meter

(b) 90 Meter

(d) 325 Meter

8 / 24

8. Where More Than 100 Women Are Currently Employed in the Coal Mines What will be the area of the Crench?

325 Meter

None

9 / 24

9. Mines Other Than Coal Mines Where More Than 200 Women are Employed What will be the area of Crench in that mines?

325 Meter

None

10 / 24

10. Coal Mines Where 51 to 100 Women Currently Employed what will be Minimum Plinth Area in that Mines ?

140 Meter

None

11 / 24

11. Mines Other Than Coal Mines Where 101 - 200 Women Are Currently Employed What will be the Crench Area in that Mines?

140 Meter

None

12 / 24

12. In how many days should the Medical Examination of the children participating in the Crenche be held?

(a) Every Month

(b) Every 3 Month

(d) Every Year

13 / 24

13. In how many days should the Medical Examination of the Attending Women be held in the Crench?

(a) Every Month

(b) Every 2 Month

(d) Every 6 Month

14 / 24

14. Record of Owner Agent Manager, Women Staff as per Crenche Rules 1966 Will do according to which schedule?

(a) Schedule - 4

(b) Schedule - 3

(d) Schedule - 7

15 / 24

15. How many liters of water should be provided per Children for the children participating in the Crenche?

(a) 10 Liters

(b) 15 Liters

(d) 30 Liters

16 / 24

16. How much drinking water will be kept for Cooled Water Per Children for the children participating in the Crenche?

(a) 2 Liter / Children

(b) 3 Liter / Children

(d) 10 Liter / Children

17 / 24

17. According to which schedule will the Cradles, Cots, Beds, Linen bedding, Feeding Bottles, Cooking Utensils of Children participating in the Crenche be maintained?

(a) Schedule - 2

(b) Schedule - 3

(d) Schedule - 6

18 / 24

18. According to which schedule of Milk and Diet for Children participating in the Crenche Will be maintained?

(a) Schedule - 3rd

(b) Schedule - 2nd

(d) None of these

19 / 24

19. According to crenche rules, The Floor Area Will Be Of Cement Or Stone, And The Height Of Ceiling Roof?

(a) Not be Less Than 4 Meter

(b) Not be More Than 4 Meter

(d) Less Than 4 Meter

20 / 24

20. In which form the Attendance Record of Medical Examination of Children is kept?

(a) Form – A

(b) Form – B

(d) Form – D

21 / 24

21. In which Form for Recording the Result of the Medical Examination of the Nursing Mother's is kept ?

(a) Form – B

(b) Form – C

(d) None of these

22 / 24

22. What is the Form for Recording the Particulars of the Children Attending the Crenche ?

(a) Form - C

(b) Form – D

(d) None of these

23 / 24

23. Crenche Rules - Which rules were applicable before 1966?

Mines Crenche Rules - 1959

None

24 / 24

24. Inspection of Crenche is done by?

Competent Person Authority

None

Your score is

The average score is 0%

LinkedIn Facebook VKontakte

Created on October 06, 2021

Welcome to Central Electricity Authority {CEA - 2010} Mine Electricity Rules 2010 MCQs

1 / 240

(1.) Full Form Of CEA ?

Central Electricity Authority

None

2 / 240

(2.) Before the year 2003, which Electricity Act was used to exchange electricity in India?

Year 1968

None

3 / 240

(3.) When were the Indian Electricity Acts first made in India?

Year 1910

None

4 / 240

(4.) When did the Indian Electricity Rules 2010 come into force in India?

(a.) 24 September 2010

(b.) 20 February 2010

(c.) 1 January 2010

(d.) None Of these

5 / 240

(5.) Low Voltage Means ?

Voltage Upto 250 Volt

None

6 / 240

( 6.) Medium Voltage Means ?

Voltage 250 Volt to 650 Volt

None

7 / 240

(7.) High Voltage Means ?

Voltage up to 650 Volt To 33,000 Volt

None

8 / 240

(8.) Extra High Voltage Means ?

Means Voltage above 33,000

None

9 / 240

(9.) Write 6600 Volt in KV?

6.6 KV

None

10 / 240

(10.) Can Electricity be carried on Underground Mines, Open Cast Mine, Mine Surface till Boundary?

(a) 11 KV

(b) 6.6 KV

(d) None of these

11 / 240

(11.) Underground Mine, Open Cast Mine, How much Electricity can be taken out of 11 KV Electric which is carried on Mine Surface?

(a.) 6.6 KV

(b.) 11 KV

(c.) 3.3 KV

(d.) None of these

12 / 240

(12.) Hand Held Apparatus such as - Maximum Voltage up to what maximum current can be used in Coal Drill Machine?

(a) Maximum 125 Volt

(b) Maximum 110 Volt

(d) None of these

13 / 240

(13.)What is the maximum number of Volts Electricity can be used up to in Underground Mine for Lighting?

(a.) Maximum 125 Volt

(b.) Maximum 250 Volt.

(c.) Maximum 300 Volt.

(d.) None Of These

14 / 240

(14.) Electric can be used up to what voltage for maximum lighting in Open Cast Mine?

(a.) Maximum 250 Volt

(b.) Maximum 300 Volt.

(c.) Maximum 500 Volt

(d.) None Of These

15 / 240

(15.) What is the maximum Volt in Hand Held Portable Apparatus, Remote Control, Interlock Circuit till Electricity Can Be Used?

(a.) 30 Volt

(b.) 32 Volt.

(c.) 35 Volt.

(d.) 50 Volt.

16 / 240

(16.) Electricity is brought from the Electric Company to the Central Sub-station of Mines through the Overhead-Line to the Maximum Voltage up to what?

(a.) 132 KV

(b.) 250 KV

(c.) 500 KV

(d.) 6.6 KV

17 / 240

(17.) From the Central Sub-Station to the Mine, up to how many Voltage Electricity can be supplied ?

11 KV or 33 KV

None

18 / 240

(18.) How Much Voltage for Main Fan, Winding Engine, Sump Motor, Main Pump in Big Mine Till current is needed?

(a.) 3.3 KV

(b.) 6.6 KV

(c.) 500 Volt

(d.) None Of these

19 / 240

(19.) L.H.D. , S.D.L. How much voltage current is required to run a big machine?

(a.) 550 Volt

(b.) 660 Volt

(c.) 250 Volt

(d.) None Of these

20 / 240

(20.) How much Volt Current is required to run Contineous Miner?

(a.) 1.1 KV

(b.) 550 Volt

(c.) 250 Volt

(d.) 6.6 KV

21 / 240

(21.) How much voltage current does Drgline, Shovel, Drill machine operate in Large Open Cast Mine needs ?

3.3 KV to 6.6 KV

None

22 / 240

(22.) Maximum how many sub station are available in Large open cast mine?

(a) OB Sub-Station

(b.) Coal Sub-Station

(c.) Both (A) and (B)

23 / 240

(23.) Up to what maximum voltage current is used in the pump?

440 to 550 Volt

None

24 / 240

(24.) By which machine 550 volts is converted into 125 Volt to give Electric Supply in Drill Machine?

(a.) Drill Panel

(b.) Gate And Box

(c.) Both (A) and (B)

(d.) None Of these

25 / 240

(25.) What type of Apparatus is Auxillary Fan?

(a.) Transportable Apparatus

(b.) Portable Apparatus

(c.) Fixed Apparatus

(d.) None Of These

26 / 240

(26.) What are the Apparatus which reduce permanently in one place, what are they called?

(a.) Fixed Apparatus

(b.) Portable Apparatus

(c.) Transportable Apparatus

(d.) None Of these

27 / 240

(27.) Such Electric Apparatus which can walk while in operation are called?

Portable Apparatus (CCM, LHD, SDL,)

Null

28 / 240

(28.) Such Electric Apparatus which do the work in a steady state, but they are easily available when needed. They can be taken from one place to another place are called ?

Transportable Apparatus

Null

29 / 240

(29.) Apparatus used by holding in hand is called?

Hand Held Apparatus

Null

30 / 240

(30.) Portable Apparatus like CCM, LHD, SDL, how many cores are there in Traillng Cable ?

5 Core ( 3 Power Core , 1- Earth Core , 1 Power Core )

None

31 / 240

(31.) Metal screen plating on the core of the cable is called?

Individually Screened, Cable

Null

32 / 240

(32.) Such a device which automatically cuts off the current when the current in the conductor is high is called?

Cut Out

Null

33 / 240

(33.) Hand-operated device by which the connection of the circuit can be opened or closed can be done is called ?

Switch

Null

34 / 240

(34.) Such a switch which is made to cut or connect all the poles of the circuit together, is called?

(a.) Linked Switch

(b.) Switch

(c.) Conductor

(d.) None Of these

35 / 240

(35.) By which Apparatus the Voltage is reduced to give Electric Current in the face-mounted machine like (SDL, LHD, CM Rood Header) in Mine?

(a.) Gate - end - box

(b.) Drill Panel

(c.) Both (A) and (B)

(d.) None Of these.

36 / 240

(36.) Full Form of Circuit Breaker ?

(a) OCB - Oil Circuit Breaker

(b) ACB - Air Circuit Breaker

(d) SF6 - Sulphur Hexa Floricle Breaker

(e) MOCB - Minimum Oil Circuit Breaker

37 / 240

(37.) Which type of circuit breaker is used in voltage above 3.3 KV or 33 KV?

SF6 Breaker (Sulphur Hexa Circuit Breaker )

None

38 / 240

(38.) Such Switchgear which is used to cut off the supply of the section is called?

(a.) Isolator Switchgear.

(b.) Isolator

(c.) Conductor

(d.) Cable

39 / 240

(39.) When many Switchgear are put together at one place, they are called?

(a.) Switch board.

(b.) Isolator

(c.) Metallic Covering

(d.) None Of These

40 / 240

(40.) A conducting wire, cable, pipe, plate from which electricity flows is called?

(a.) Conductor

(b.) Semi - Conductor

(c.) Cable

(d.) Circuit

41 / 240

(41.) The Electrical Supervisor should have the following certificate?

(a.) Electrical Certificate

(b.) Mechanical Certificate

(c.) Over men Certificate

(d.) All Of These

42 / 240

(42.) At least how many years of experience the Electrical Safety Officer employed in Mine should have?

Electrical Engineer Diploma - 10 Year Degree - 5 Year

None

43 / 240

(43.) In which form will the Electrical Safety Officer will keep the recode of his investigation?

Schedule 4 Form

None

44 / 240

(44.) Agent, Manager, Owner in Mine having Connected Electrical Load more than ___ KW Will appoint an Electrical Safety Officer?

(a.) 250 KW

(b.) 650 KW

(c.) 33 KW

(d.) 66 KW

45 / 240

(45.) Will Danger Notice be imposed in for the Installation Overhead Line Electric Plant exceeding _______ Volt?

(a.) More Than 250 Volt

(b.) 550 Volt

(c.) 3.3 KV

(d.) 6.6 KV

46 / 240

(46.) Will the Earthing System be installed and placed in a place with more current supply than ____ Volt?

(a.) More than 250 Volt

(b.) 650 Volt.

(c.) 1.1 KV

(d.) 3.3 KV

47 / 240

(47.) Inspection of Electric Installation or Apparatus in Mines should be checked in the interval of how many days?

1 Year (As per Indian Testing Standard)

Null

48 / 240

(48.) Electrical installation should be checked by the Inspector after an interval of how many years?

(a.) Maximum 5 Year

(b.) 3 Year

(c.) 2 Year

(d.) None Of these

49 / 240

(49.) At least how many gas masks should be there to deal with fire and water in mine?

(a.) 2 Gas Mask

(b.) 5 Gas Mask

(d.) None Of these

50 / 240

(50.) In how many days should the non-extinguishing equipment (Sand filled bucket, fire extinguisher) be checked?

(a.) 1 year

(b.) 2 Years

(c.) 5 Years

(d.) 10 Years

51 / 240

(51.) When the Transformer Capacity is _____ MVA, the Protectine Equipment will be kept in that Mines?

5 MVA

None

52 / 240

(52.) If a person dies due to electrical shock then the manager will give his information to the Inspector within what time duration ?

(a.) 24 Hours

(b.) 3 Days

(c.) 7 Days

(d.) 1 Year

53 / 240

(53.) If a person dies or is likely to die due to an Electrical Accident, then the Manager
Within how much time will give its written report to Inspector ?

(a.) 48 Hours

(b.) 3 Days

(c.) 7 Days

(d.) 30 Days

54 / 240

(54.) Installation of more than - - - - - - - Volt of Electric Supplier will be done by the Inspecting & Testing Inspector in a span of 5 years?

(a.) 550 Volt

(b.) 650 Volt

(c.) 11 KV

(d.) 33 KV

55 / 240

(55.) Electrician or other Competent Person working on Overhead Une will be given the following Safety Device?

(a.) Safety Shoe

(b.) Safety Belt

(c.) Gamboot

(d.) All Of These

56 / 240

(56.) If leakage is found in the installation of the consumer, then the Electric Supplier Inspector after how much time will disconnect the power supply after getting the permission?

(a.) 24 Hours

(b.) 48 Hours

(c.) 7 Day

(d.) 15 Day

57 / 240

(57.) Circuit Breaker in Current up to --------Voltage for Large Transformer or Equipment Will it be imposed?

Transformers larger than 1000 KVA of voltage up to 11 KV. Transformers larger than 2500 KVA over 11 KV.

None

58 / 240

(58.) How long before the consumer will be given notice to shut down for Switching Electric Supply for Testing Maintenance & Planned Work ?

(a.) 24 Hours

(b.) 48 Hours

(c.) 7 Days

(d.) 15 Days

59 / 240

(59.) What should be the minimum Voltage Installation Resistance of more than 650 Volts in Mines?

(a.) 5 Mega Ohm

(b.) 10 Mega Ohm

(c.) 100 Mega Ohm

(d.) None Of These

60 / 240

(60.) What should be the minimum installation resistance of equipment up to 650 Volt in Mines?

(a.) 1 Mega Ohm

(b.) 5 Mega Ohm

(c.) 10 Mega Ohm

(d.) All Of These

61 / 240

(61.) What should be the minimum installation resistance in a 33 KV sub-station?

(a.) 1 Mega Ohm

(b) 5 Mega Ohm

(c.) 500 Mega Ohm

(d.) 1000 Mega Ohm

62 / 240

(62.) What will be the clearances for each switch board in the installation above 250V?

(a) Minimum 1M in front of the Switch Board.

(b) If Attachment or Other Connection is installed behind the Switch Board, then the empty part should be less than 20 cm. will be wider than 50 cm.

(c.) - Both (a) & (b)

63 / 240

(63.) In the earthing system of the Electric Supply Company, the resistance testing should be done in the interval of how many days?

(a.) Minimum 2 Years

(b.) 3 Years

(c.) 5 Years

(d.) 10 Years

64 / 240

(64.) An Earth Leakage Protective Device will be Installation to the Electric Supply what should be the current so that the current can be cut off immediately?

(a.) 100 Milli amp

(b.) 500 Milliamp

(c.) 650 Milliamp

(a.) 100 Milli amp. (b.) 500 Milliamp (c.) 650 Milliamp (d.) None Of These

65 / 240

(65.) After testing the resistance in the Earthing System of the Electric Supply Company, that record will be kept safe for at least how many days?

(a.) 1 Year

(b.) 2 Years

(c.) 3 Years

(d.) 5 Years

66 / 240

(66.) From whom permission is taken before electrical installation above 650V?

(a.) Electrical Inspector of Mines

(b.) Mining Inspector of Mines

(c.) General Manager

(d.) All Of These

67 / 240

(67.) Before electrical installation of more than 650V or before making changes to whom will the record be sent?

(a) Electrical Inspector

(b.) Mining Inspector

(c.) Coal Inspector.

(d.) All Of These

68 / 240

(68.) The following arrangements will be made near Oil Apparatus more than 2000 Liters?

(a) Fire Baffle Wall of 4 Hours

(b) Shock Pit will be made

(d) All of these

69 / 240

(69.) For transformers with 10 MVA or larger or more than 2000 Liters for Oil Transformers how will the Type Protection System be installed?

IS - 3034:199 or Nitrogen Injection Fire Protection

Null

70 / 240

(70.) The following protection will be taken during the power supply of more than 650V?

(a) Over Current Protection

(b) Earth/Fault Leakage Protection

(d) Differential Protection (for Power Trip)

(E) All Of these

71 / 240

(71.) According to which code the Electric Supply, Installation Cable, Supply Line of more than 650V will be tested ?

IS Code - Site Taste

Null

72 / 240

(72.) Except Overhead Line Metallic Sheeted to Other Conductor of more than _______ Volt Will it be done?

(a.) 250 Volt

(b.) 650 Volt

(c.) 3.3 KV

(d.) 6.6 KV

73 / 240

(73.) Every supplier and consumer must test the Earthing System once in an interval of how many days?

(a.) Every Year

(b.) 2 Years

(c.) 3 Years

(d.) 5 Years

74 / 240

(74.) In which season will the Earthing System be tested every year?

(a.) During the summer season

(b.) During the rainy season

(c.) In the cold season

(d.) Not in any season.

75 / 240

(75.) Will the Earthing System of the Neutral Point of each Generator, Transformer be connected separately?

(a.) Yes

(b.) No

76 / 240

(76.) At least how many meters high Fencing will be installed around the Outdoor Sub-Station?

(a.) 1.8 Meter

(b.) 2 Meter

(c.) 2.5 Meter

(d.) 3 Meter

77 / 240

(77.) Will the arrangement of Adequate Ventilation be done in the Sub-Station/ Switch Station?(

(a.) Yes

(b.) No

78 / 240

(78.) From whom to get permission if the height is to be increased than the Contractor for Below Overhead Line, Road, Building, Embankment, etc. ?

(a.) Electrical Inspector of Mines

(b.) Mines Manager

(c.) General Manager

(d.) None Of These

79 / 240

(79.) Any sub-station limit or 650 Volt blasting is to be done within 300 meters of the supply or tower, then permission will be taken from whom?

(a.) Mines Manager

(b.) General Manager

(c.) Electrical Inspector Of Mines

(d.) None Of These

80 / 240

(80.) If the Voltage at Overhead Line is 650 Volt or less than the distance between the supports will not be more than _____ meter?

(a.) 65 Meter

(b.) 100 Meter

(c.) 150 Meter

(d.) 200 Meter

81 / 240

(81.) If the telecommunication line is placed on the pole through which the power line is passing, then the breaking strength of the conductor of the telecommunication line will not be less than how many Kg?

(a.) 270 Kg

(b.) 300 Kg

(c.) 450 Kg

(d.) 500 Kg

82 / 240

(82.) Breaking Strength of Guard Wire will not be less than?

(a.) 635 Kg

(b.) 500 Kg

(c.) 735 Kg

(d.) 1000 Kg

83 / 240

(83.) At how many points will each wire of the overhead line be placed in 1 kilometer?

(a.) 3 Point

(b.) 5 Point

(c.) 7 Point

(d.) 10 Point

84 / 240

(84.) Every Stay Wire shall be earthed, insulator at least up to the _____Meter?

(a.) 2 Meter

(b.) 3 Meter

(c.) 5 Meter

(d.) 10 Meter

85 / 240

(85.) Two Overhead Power Line One Ten Meter will not be less than ______ Meter?

(a.) 2 Meter

(b.) 2.5 Meter Crosses Ray, then the clearance between the two lines

(c.) Not Less Than 2.4 Meter

(d.) None Of These

86 / 240

(86.) To get supply on Overhead Line what will be used for it?

Lightning Arrestor

Null

87 / 240

(87.) What will be the scale made on Mines Electricity Plan be ?

(a.) 1:2000

(b.) 1:1000

(c.) 1:5000

(d.) None Of these

88 / 240

(88.) Annual Returns of Electric Apparatus, Size, Type, Use will be sent to the Electrical Inspector of Mines by filling up to which date every year ?

(a.) 1 February

(b.) 1 January

(c.) 31 December

(d.) None Of These

89 / 240

(89.) How many places in Mines, where there can be a danger due to power outage will the Flame Safety Lamp be kept?

(a.) 1 Or More

(b.) 2 Or More

(c.) 3 Or More

(d.) None Of these

90 / 240

(90.) What is the maximum voltage that can be used in Fixed Apparatus with Bolted Plug?

(a.) 250 Volt.

(b.) 650 Volt.

(c.) 1000 Volt.

(d.) 1250 Volt.

91 / 240

(91.) Transformer Details Which Regulations ?

Regulation 103

None

92 / 240

(92.) To whom will the Annual Returns of Electrical Apparatus be deposited by the Mines Manager?

(a.) Electrical Inspector of Mines

(b.) General Manager

(c.) Chief Inspector

(d.) All Of These

93 / 240

(93.) Isolation And Fixing Of Transformer And Switch gear Which Regulation ?

Regulation 98

None

94 / 240

(94.) A barbed wire will be installed in the middle of the Anti Climbing Device Pole till ______ meter, on which Will a notice board showing Voltage be installed?

1.2 Meter to 1.5 Meter

Null

95 / 240

(95.) Electric Supply System of Underground Mine shall be designed in such a way that 1100V do not exceed the fault current in the installation up to _____ ?

(a) 50 Mili Amps

(b) 750 Mili Amps

(d) 50 Ampere

96 / 240

(96.) Setting of Earth Leakage Relay?

(a) 80 To 100 Milli Amps in Underground Mine

(b) 200 To 500 Milli Amps in Open Cast Mine

(d) None of these

97 / 240

(97.) Switchgear installed to automatically cut off the power supply fault of the mine will be checked and recorded in the working copy of Relay after what time span?

(a) Every day

(b) 7 days

(d) 30 Days

98 / 240

(98.) What should be the Power Supply System of Mines to keep the Fault Current in Limit?

(a) Solidly Earth Neutral System.

(b) Insulated Earth Neutral System.

(d) All Of These

99 / 240

(99.) Restricted Neutral System of Power Supply is beneficial because ?

(a) Heating is less in Apparatus than that.

(b) Fault Current Generating Stress in Apparatus and Circuit is less.

(d) All Of These

100 / 240

(100.) Restricted Earth Neutral Power Supply System from 1.1 KV to 11 KV in Open Cast Mine To what extent should the fault current be kept limited?

(a) 5 Ampere

(b) 50 Ampere

(d) None Of These

101 / 240

(101.) The effectiveness of Switch Gear and Relay should be checked at intervals of how many days?

1 Month

3 Months

6 Months

1 Year

102 / 240

(102.)What is the Maximum Voltage can be used in Fixed Apparatus with Bolted Type?

125 Volt

250 Volt

650 Volt

1000 Volt

103 / 240

(103.) Where the Voltage exceeds 125, where in the opinion of the Inspector there is danger from Coal Dust or Inflammable Gas

Other Cable will not be used except the following Type Cable?

Concentric Cable

Metallic Covering Cable

Metallic Sheathed Cable

All Of These

104 / 240

(104.) If the current is supplied more than 250V but up to 650V, then the distance between Metallic Covering and Earth Conductor should not exceed ?

30 CM

50 Cm

75 Cm

100 Cm

105 / 240

(105.) The metallic cover of each cable shall be such that all the parts of the cover, each joint the conductivity will not be less than what --------% of the cable has the greatest conductivity?

25 %

50%

75%

90%

106 / 240

(106.) The conductivity of each screen of the cable will not be less than the power conductivity?

25%

50 %

75%

90%

107 / 240

(107.) The total conductivity of all screens will not be less than that of copper wire conductivity?

0.15 Sq. cm

0.25 Sq. Cm

0.50 Sq. cm

None Of These

108 / 240

(108.) How Many Cores are in Portable and Transportable Apparatus Flexible Cable?

2 Core Or Multi Core

None

109 / 240

(109.) Type Connector in Flexible Cable for Machines from 650 Volt to 33 KV will it be imposed?

Bolted Type Connector

None

110 / 240

(110.) Length of Flexible Cable in Portable & Transportable Apparatus in Mine will be maximum?

Not More Than 100 Meter

None

111 / 240

(111.) Long Wall Machine, Shuttle Car, L.H.D. in Underground Mines. The length of the cable will not exceed the maximum by how many meters?

Not More Than 250 Meter

None

112 / 240

(112.) What will be the maximum length of cable for HEMM in Open Cast Mine?

300 Meter

None

113 / 240

(113.) Bucket Wheel Excavator maximum length of Trailing Cable for 11 KV, how many meter will it be?

1000 Meter

None

114 / 240

(114.) What will be the maximum length of Trailing Cable of SDL Machine in Underground Mines?

Not More Than 100 Meter

250 Meter

600 Meter

1000 Meter

115 / 240

(115.) Intrinsically Safe Circuit will be installed in?

Signalling

Telecommunications

Remote Control Or Insulator Tester

All Of These

116 / 240

(116.) The length of Trailing Cable in Continuous Miner will not exceed how many meter?

Not More than 100 Meter

Not More than 250 Meter

300 Meter

1000 Meter

117 / 240

(117.) The length of the Trailing cable in the Dragline will not exceed how many Meter?

600 Meter

1000 Meter

1100 Meter

All Of these

118 / 240

(118.) Flexible cable is used for?

Portable Apparatus

Transportable Apparatus

Both (A) & (B.)

119 / 240

(119.) From whom permission is taken to increase the length of dragline cable more than 600 meters?

Inspector

None

120 / 240

(120.)Where will the flexible cable be connected to the main cable?

Circuit Breaker

None

121 / 240

(121.) Voltage in Signaling will not exceed ---------------------Volt?

30 Volt

None

122 / 240

(122.) What % of Inflammable Gas (CH4) Methane Gas in Gassy Coal Seam of any degree, electricity supply will be cut off from that place if found?

1.25 %

None

123 / 240

(123.) At what distance will the FLP (Flame Proof Apparatus) be placed from the face in First Degree Mines?

Last Ventilation Connection of the Face

None

124 / 240

(124.)At what distance will the FLP Apparatus be placed from the face in Second Degree Mines?

90 Meter

None

125 / 240

(125.) At what distance will FLP Apparatus Face / Goaf be placed from Last Ventilation in Third Degree Mine?

270 Meter

None

126 / 240

(126.) Intrinsically Safe Circuit Remote Control Insulator Tester Circuit, which degree of Mine will it be put in?

All First , Second , Third Degree Mines

None

127 / 240

(127) What type of Apparatus Machine Approved by DGMS will be used in Underground Mines?

FLP ( Flame Proof Apparatus )

None

128 / 240

(128.) Cable to be used on Surface -------------- as per specification
would you be?

BIS

None

129 / 240

(129.) Sub-station limit or electrical supply line of more than 650V in mine boundary
Of................................................. If blasting is to be done for any work within ....... meters, then contact the concerned electrical inspector.
Permission will be taken.

100m

200m

250m

300m

130 / 240

(130.) From whom permission will be taken before the use of Electric Locomotive & Battery Locotive with Trolly Wire Method up to 650V in Underground Mines?

Electrical Inspector

None

131 / 240

(131.) Where A.C. The Voltage of Supply is more than --------------------- Volt, where the Nutral Point or Mid Point will be earthed?

More Than 30 Volt

None

132 / 240

(132.) What type of certificate should the appointed Electrical Supervisor have?

Electrical Supervisor Valid Certificate

None

133 / 240

(133.) If any Electrical Supervisor is absent, then Owner, Agent, Manager will be appointed as Subtitute Electrical Supervisor instead of him for how many days?

3 Days

None

134 / 240

(134.) After how many days of absence (absence) of the Electrical Supervisor, its notice will be sent to the Inspector?

7 Days

None

135 / 240

(135.) On whose permission will the Electrical Supervisor work in more than one mines?

Electrical Inspector of Mines

None

136 / 240

(136.) Who can give Deviation in the Indian Electricity Rules 2010?

Central Government & State Government

None

137 / 240

(137.) The pilot circuit should not operate at a voltage lower than________ if the power comes on after being cut off while in the Pilot Switch Run Position.

120%

None

138 / 240

(138.) Who writes the Daily Electrical Log-book?

Electrical Supervisor

None

139 / 240

(139.) Conductivity of each screen in a separately screened cable will not be less than that of the power core?

25% Total Screened Conductivity Not less than 0.15% Sq cm.

None

140 / 240

(140.) Cap Lamp is Apparatus?

FLP

Intrinsically safe

Both A & B

None Of These

141 / 240

(141.) If the Overhead OH Line crosses a public road, what will be the minimum clearance from the ground?

6.1 Meter

None

142 / 240

(142.) Clearance Sag,(mistake) of the lowest ground conductor?

4.6 Meter

None

143 / 240

(143.) What will be the minimum clearance between two conductors?

1.8 Meter

None

144 / 240

(144.) OH Line crosses Haul Road, then there will be a clearance of how many meter between Big Dumper & Sag (Soul) of Cable.

Not Less Than 1 Meter

None

145 / 240

(145.) OH Line crosses a Haul Road, then there will be clearance of how many meters between Earth & Cable?

Not Less Than 12 Meter

None

146 / 240

(146.) In intrinsically safe circuit, the voltage of the circuit does not exceed.

25V & Current not more than 1 Ampere.

None

147 / 240

(147.) Intrinsically safe Apparatus are used in Second & 3rd Degree Mine.

All Place

None

148 / 240

(148.) The FLP Apparatus will be as follows -

Gap Between Flange - Very little. Width of Flange - 25 MM Internal Gap Of Flange - 0.5 MM If there is a glass window in the Apparatus, then the glass size will be = 6 MM Thick (Thick)

Null

149 / 240

(149.) External Temprature in FLP Apparatus will not exceed?

Not More Than 200°C

None

150 / 240

(150.) At what degree the temprature can cause a fire in methane gas?

650°C

None

151 / 240

(151.) What should be the temprature for the fire to start in the wood connected to the FLP.

151.) What should be the temprature for the fire to start in the wood connected to the FLP.

(151.) What should be the temperature for the fire to start in the wood connected to the FLP ?

Not Less Than 226° C

Null

152 / 240

(152.) If Current on the Overhead Line is 650 Volt  or more than that then what will be the distance between the Vertical and Overhead Line from the roof of any house ?

(a.) 3.7 Meter

(b.) 4 Meter

(c.) 4.5 Meter

(d.) 10 Meter

153 / 240

(153.) Current on the Overhead Line 650 Volt. Then what will be the vertical distance between the overhead line and the ceiling?

(a.) 2.5 Meter

(b.) 3 Meter

(c.) 3.5 Meter

(d.) 4 Meter

154 / 240

(154.) If on the Overhead Line Current is 650 Volt then the distance of the cable horizontally from the terrace, balcony, will not be less than?

1.2 Meter when the current remains up to 11 KV.

Null

155 / 240

(155.) The current on the OH line is up to 650 volts, then the distance of the cable horizontally from the terrace, balcony will be?

1.2 Meter

Null

156 / 240

(156.) If the current on the overhead line is more than 33KV, the vertical distance of the roof will be?

3.7M+0.3M Per Extra 33KV Current

Null

157 / 240

(157) The breaking strength of the conductor of the overhead line will not be less than?

Not Less Than 350 Kg

Null

158 / 240

(158.) If Overhead Line Current 650 Volt then between Street and Overhead Line distance will not be less than ?

5.8 Meter

Null

159 / 240

(159.) If the current exceeds 650V then the distance between the OH line and the ground steel will not be less than ________ meter ?

6.1 Meter

Null

160 / 240

(160.) Provisions of lesson ix of CEA [Central Electricity Authority] Regulation 2010?

(a) will be applicable on some selected mines

(b) Will be applicable only on Underground and Open Cast Mine

(d) All types of Underground and Open Cast Mine at Mine Boundary.

161 / 240

(161.) Who is responsible for complying with Lesson ix of CEA Regulation 2010?

(a) Manager ,Engineer ,Electrical Supervisor.

(b) Agent, Manager, Engineer.

(d) Owner, Agent, Manager, O|M M/S, Engineer All.

162 / 240

(162.) New Apparatus over 650 Volts to be Installed in the Mine after meeting with the Electrical Inspector of Mine, how many days before the notice will be given?

(a) 3 Day

(b) 7 Day

(d) 15 Day

163 / 240

(163.) If the Overhead Line crosses the Dumper tlau / Road, then the lowest point of the Overhead Line is
What will be the minimum height of the current Canductor from the ground?

(163.) If the Overhead Line crosses the Dumper tlau / Road, then the lowest point of the Overhead Line is
What will be the minimum height of the current Canductor from the ground?

(163.) If the Overhead Line crosses the Dumper tlau / Road, then the lowest point of the Overhead Line Conductor must be of minimum what height from the ground ?

(a) 10 m

(b) 20 m

(d) 15 m

164 / 240

(164.) How will the sub-station in the underground part of the mine be kept ?

(a) Goaf/ will be at a sufficient distance from the face.

(b) In the Intake Roadway.

(d) All Of These

165 / 240

(165.) All non-current carrying metal parts of the electric system shall be connected to an earthing system which wil be ?

(a) be located on the surface.

(b) located anywhere in the underground part.

(d) None Of These

166 / 240

(166.) The Electric Supply System of Underground Mine shall be designed in such a way that 1100V
Do not exceed the fault current in the installation up to ?

(a) 50 Mili Amps

(b) 750 Mili Amps

(d) 50 Ampere

167 / 240

(167.) Setting of Earth Leakage Relay?

(a) 80 To 100 Milli Amps in Underground Mine.

(b) 200 To 500 Milli Amps in Open Cast Mine

(d) None of these

168 / 240

(168.) Switchgear installed to automatically cut off the power supply fault of the mine
and will it be checked and recorded in the working copy of Relay after how many days ?

(a) Every day

(b) 7 Day

(d) 30 Day

169 / 240

(169.) What should be the Power Supply System of Mines to keep the Fault Current in Limit ?

(a) Solidly Earth Neutral System.

(b) Insulated Earth Neutral System.

(d) All Of These.

170 / 240

(170.) Restricted Neutral System of Power Supply is beneficial because ?

(a) Heating in Apparatus is less than that

(b) Fault Current Generating Stress in Apparatus and Circuit is less.

(d) All Of These

171 / 240

(171.) Restricted Earth Neutral Power Supply System from 1.1 KV to 11 KV in Open Cast Mine
To what extent should the fault current be kept limited ?

(a) 5 Ampere

(b) 50 Ampere

(d) None Of These

172 / 240

(172.) According to CEA Registration 2010, can Electricity be used at what m

(a) 550V (b) 1100V (c) 3300V . (d) 6600 V

aximum Volt in the Underground part of the mine?

(a) 550V

(b) 1100V

(d) 6600 V

173 / 240

(173.) Maximum up to how many Volt Electric can be used in Remote Control Circuit ?

(a) 15 Volt

(b) 30 Volt

(d) 125 Volt

174 / 240

(174.) In which underground mine of India, electricity is transmitted at 11 KV, and 3.3 KV is used ?

(a) Monidih

(b) Sudamdih

(d) Adiala Longwall Project Singreni

(e.) All Of These

175 / 240

(175.) Switchgear with safety device for safety shall be installed at the proper place?

In case of Earth Fault and Other Fault, cut off the power supply immediately.

Null

176 / 240

(176.) As per CEA (Electricity Supply Regulation2010) Cars powered by electricity to the fan Inter lock will be done with the power supply of the mine in such a way that when the main fan is off, the power will be
 Supply gets automatic cut to which degree of mine will this provision be applicable?

(a) Degree i

(b) Degree i & ii

(d)None Of These

177 / 240

(177.) Open Sparking Means?

AC electric spark in which combustible gas or coal dust can catch fire

Null

178 / 240

(178.)  What does Last Ventilation Can Action Means in District?

Last Dip - Rise Gallery after the last stopping between the Intake and Return Air routes.

Null

179 / 240

(179.) Cable -

(a) Not to be installed in Haulage Road.

(b) Keeping the cable supported.

(d) All Of These

180 / 240

(180.) CEA Reg. Switchgear ________ will be arranged to supply electricity as per Reg-105 of 2010 ?

(a) All Mine

(b) Every System.

(d) All Of These

181 / 240

(181.) Auxiliary Fan in the Underground Part of Degree Gassy Seam will be kept interlocked with the Electric Supply of the Face Machine in such a way that if the Auxiliary Fan is turned off then the Electricity of the Face Machine will be automatic?

Degree i, ii, and III All

None

182 / 240

(182.) The Conductivity of Metal Caverin of all cables except the Flexible Cable of Portable and Transportable Apparatus of Mine shall not be less than A` on all parts or at all Joint A` means?

(a) 50% of the conductivity of the largest conductor of the cable.

(b) Conductivity of the largest conductor of the cable.

(d) None of these

183 / 240

(183.) What will be the financial cover of Electric Cable?

(a) Continuous.

(b) Earthing done

(c) There should be such a structure that there is no open sparking. (c) There should be such a structure that there is no open sparking.

(d) All Of These

184 / 240

(184.) According to CEA, Electric Shovel is ?

(a) Portable Apparatus

(b)Transportable Apparatus

(c)Mobile Machine

(d) Heavy Earth Moving Machine

185 / 240

(185.) Electricity Reg. Flexible Cable of Any Portable & Transportable Apparatus as per the length will not be less than ______ meter?

(a) 90 m

(b)100 m

(d) 150 m

186 / 240

(186.) National cover in Flexible Cable of Portable Apparatus more than 250 V will be ?

(a) will be mounted on all the power cores.

(b) Earth will continue to climb on the Power Core.

(d) will continue to be mounted on the Power & Pilot Core.

187 / 240

(187.) As per Electricity Rules 2010, the length of Trailing Cable of LHD and Shuttle Car shall not exceed _____ meter?

(a) 100 m

(b) 150 m

(d) 250 m

188 / 240

(188.) 250V Financial Coverage in Flexible Cable of Portable Apparatus of more than ?

must have mounted on the Power and Pilot Core.

Null

189 / 240

(189.) In a flexible cable with a screen, which will not be ______ Less than the conductivity of the screen?

(a) 50% of the conductivity of the Power Conducted.

(b) 10% of the conductivity of the Power Conducted.

(d) None of these

190 / 240

(190.) Under what conditions can On-Screen Cable be used with Portable Apparatus?

(a) When it is used in Apparatus Underground.

(b) When it is used in Apparatus Open Cast.

(d) None of these.

191 / 240

(191.) The plyable wire of the axillary fan is an armored cable as per the Electricity Rules 2010 should be ?

(a) flexible cable

(b) non flexible cable

192 / 240

(192.) The length of the trailing cable of a 3.3 kv continuous miner shall not exceed ?

(a) 100m

(b) 150m

(d) Not more than 250 m

193 / 240

(193.) According to CEA 2010, the length of the Bucket Wheel Excavator's Flexible Cable can be kept up to how many meters?

100m

1000m if the voltage is 3.3kv

1000m if the voltage is 6.6kv

1000m if the voltage is 11kv,

194 / 240

(194.) Which is used in Electrical Apparatus Fix condition but can be moved from one place to ten easily in place?

Portable Apparatus

Transportable Apparatus

Flexible Apparatus

Mobile Apparatus

195 / 240

(195.) When two conductors of a flexible cable are joined together, then their joint are kept away, Why?

so that the two joints do not short circuit by touching each other

None

196 / 240

(196.) The length of the cable of Transportable Apparatus like Axillary fan shall not exceed .................. meters?

30m

50m

100m

250m

197 / 240

(197.) The Trailing cable of the portable apparatus shall have a flexible metal screen, if the voltage exceeds ……….

100v

250 Volt

550v

650v

198 / 240

(198.) Cable Real Flexible Cable of Electric Shovel ?

National sceen

playable armored

none of these

199 / 240

(199.) Flexible cable.

It is done with portable and transportable apparatus,

Where the fan is to be connected to the main cable, such a circuit breaker is installed, which can automatically cut off the supply of flexible cable.

Both (A) and (B)

200 / 240

(200.) Portable and transportable machine flexible cable in underground mines are ?

1 Earth core

1 Pilot core

3 Power core

All of These

201 / 240

(201.) In the underground part in the mine, the portable & transportable machine will be operated by remote control from the respective switch having pilot core.

yes

202 / 240

(202). If the blasting is to be done in any place within the boundary of sub-station of more than 650v or 300m from the electric supply line in the mine boundary, then who will give the permission?

DGMS

Regional inspector

inspector of mines

inspector of mine(electrical)

203 / 240

(203.) Electricity supply shall be stopped when—

be open sparking

In 1st & 2nd degree mine when inflammable gas is 1.25% or more

both a & b

none of these

204 / 240

(204.) Apparatus Flame Proof will be at the place mentioned below in the 1st Degree Mine.

Return Roadway

Last ventilation connection of the face

Every engine room

None Of These

205 / 240

(205.) To what degree shall the electrical cable in mine be made, installed, precautionary, operated and maintained in such a way that the chances of open sparking are minimized.

1st Degree

2nd Degree

3rd Degree

1st, 2nd & 3rd Degree

206 / 240

(206) Sub-station limit of more than 650v in mine boundary or of power supply line. If blasting is to be done for any work within meter, then permission will be taken from the concerned Electrical Inspector.

100m

200m

250m

300m

207 / 240

(207.) The flexible cable will be connected to the machine by the following.

Bolted Type Connector if Voltage is more than 650v

Plug and Socket with Electric Interlock

Direct Entry with Inspector's Permission if Motor is Small

All Of These

208 / 240

(208). There is a system of Cable Realing / Unrealing in Opencast & Underground Portable Electric Machine, then Trailing Cable will be neither of Realistic Screen nor Armouring?

yes

209 / 240

(209). The switchgear is the most commonly used in the underground part of coal mines.

OCB

ACB

MOCB

VCB

210 / 240

(210.) Trailing Cable of Dragline.

The length of more than 600 meters shall be kept after relaxation is found by the Electrical Inspector of Mine.

None

211 / 240

(211.) A.C supply system of more than 30v,

The earth will be done by connecting to the earthing point located on the surface of the mine.

for which the earthing will be done

Both (a) & (b)

none of these

212 / 240

(212.) In each of the mines-

An electrical supervisor will be placed

Electrical supervisor will be placed in every district

The electrical supervisor will be placed in the number as directed by the electrical inspector of mines

none of these

213 / 240

(213.) Who keeps the electrical supervisor in the mine.

Electrical Inspector of Mines

Regional Inspector

Manager.

Area Engineer

214 / 240

(214.) Increased Safety 'E' Protection

For those apparatus in which the arc & spark does not come out during normal working

To arrange for Extra Protection in Apparatus

Both (a) & (b)

None Of These

215 / 240

(215.) Intrinsically safe circuit shall not allow a specified flammable gas to burn if-

Circuit working in normal condition

be in a circuit fault state

Circuit operates up to fault condition prescribed by Beuro of Indian standard

Both (a) & (c)

216 / 240

(216) Mine Me 650 Volt. The insulation resistance of the equipment should be at least

1 Mega Ohm

3 Mega Ohm

5 Mega Ohm

10 Mega Ohm

217 / 240

(217.) Silica gel works in Power Transformer.

To absorb moisture in the air entering inside so that the high-electricity strength of transformer oil does not decrease.

None

218 / 240

(218.)If a person's mother-in-law should continue to breathe due to electric shock. If it stops, then for how long can it be done artificially?

30 minutes

1 hour

Do not stop until the person begins to breathe or is declared by a doctor

none of these

219 / 240

(219.) Danger notice shall be put on every such pole or tower of overhead line above 650V on which a person climbs the ladder.

in Hindi

Hindi & English

In Hindi, English & district language

none of these

220 / 240

(220). In the first shift, the Electrical Supervisor took a shut down to work on the 6.6kv Overhead Line, the work went on till the second shift and was found in the second shift, who would do the shut down.

electrical supervisor of first shift

electrical supervisor of second shift

mining engineer

none of these

221 / 240

(221.) An Electrical Engineer will be designated as Electrical Saftey Officer in a mine having load more than .......

200kw

250kw

500kw

1000kw

222 / 240

(222). When a person comes to the connect of live electric part, then quick and automatic tripping of supply will give him electric shock.

yes

223 / 240

(223.) Insulation Resistance of Electric Cable/Apparatus.

Increase with time

Decrease with time

Time to Time Measurement should be recorded

B & C Both

224 / 240

(224.) What should be the minimum resistance of the earth pit for the safety of the electrical system of the mine?

1 - Ohm

2 - Ohm

4. Ohm

5 – Ohm

225 / 240

(225.) What type of land should not be chosen for making earth pit?

Sait & Coack Mix Soil

Dry Soil

Dhachni soil

Sand Stone

226 / 240

(226.) Earthing of Electrical Apparatus –

Electric shock reduces the risk of death

Avoids Equipment Damage. Due to Heavy & Fault

Trust in the power supply increases

All Of These

227 / 240

(227.) What will be the Tripping Current Maximum of Earth Leakage in U/G Mine for all installations above 250 V?

50 Milli Ampere .

100 Milli Ampere

750 Milli Ampere

None Of These.

228 / 240

(228.) Filtration of Transformer Oil –

Reduces Moisture

Removes solid particles

Dia-electric strength of oil increases

All Of These

229 / 240

(229.) With sufficient clearance on all sides of the Electrical Apparatus –

There is convenience in operation

Keeps in Maintance

Adequate ventilation takes place

All Of These

230 / 240

(230.) When a 3.3 KV overhead line crosses a street, its nearest conductor should have minimum clearance from the ground?

5.5 M.

5.6 M.

5.8 M

6.1 M.

231 / 240

(231.) Drill, Crain & Shovel has to cross Overhead Power Line, then this work –

be done at a particular place, where the Ground Clearance is sufficient

Should be done during day time only

Should be under the supervision of Competent Person

All Of These

232 / 240

(232.) Is it necessary to put credil guarding under the overhead line at such a place where the line crosses?

Dumper Haw Road

Street

Public Place.

All Of These

233 / 240

(233.) In order to protect the overhead line from electric lightning exceeding 650V –

Lining Assetor Supply will be installed at both the receiving and the receiving end.

None

234 / 240

(234.) Earthing the overhead line of more than 650V means.

by a continuous wire, which is firmly attached to each pole

The wire will be earthed at 3 points per Kelometer

Both A & B.

None of these

235 / 240

(235.) Oil in Power Transformer with Oil –

Works as an insulator, and keeps the coils cool

Filtering is needed when the breakdown value reaches 40 KV home

Both A & B.

None of these

236 / 240

(236.) The Single Line Circuit Diagram which is sent to the Inspector for obtaining permission to power the equipment above 650V, is

should be made from the starting point of the supply

Apparatus, Cable, or Overhead & Line condition

Present Equipment will be shown in blue color & Proposed Equipment will be shown in red colour

All Of These

237 / 240

(237.) To take the permission of Electrical Inspector of Mine to charge power in Sub-station in Underground Mine, in Part Plan of the given Mine.

Show the status of the Sub-Station

Ventilation Circuit should be shown

Air Velocity should be Wet/ Bud Temperature and Moisture

All Of These

238 / 240

(238.) If more than 660V crosses the overhead Railway Line, state Highway or any public place,the Noc should be sent along with the application for charging it to Electrical Inspector of Mines.

Mines Owner

State Government

Related Authority

None of these

239 / 240

(239.) Submitted in Site Teste Report for Permission Lane to Charge Apparatus, Cable, or Overhead Line above 650V.

The IR value of the proposed Apparatus, Cable and Overhead Line should be given

Result of Teste Report of Relay and Protective Equipment should be included

Both A & B

None Of These

240 / 240

(240.) Machine to Flexible Cable will be connected by-

Plug and Shocket with Electric Interlock

Bolted Type Connector if Voltage 650 Volt. more than then

Direct Entry is a small motor with the permission of the Inspector

All Of These

Your score is

The average score is 0%

LinkedIn Facebook VKontakte

Mines Vocational Training Rules 1966 has made under which section of the Mines Act 1952?

When did the Mines Vocational Training Rules {MVTR} 1966 come into force?

Where does MVTR 1966 apply?

Under which section of the Mines Act 1952, Manager is decided?

Is training under MVTR 1966 is applicable to Official Person Like Mining Sardar , Overmen , Under Manager , Manager )?

According to First Schedule- Before Employing in Surface or Open Cast Mines, how many days of training is given to the incompetent person?

How many days of Theoretical and Gallery Training will be given to Every Person before working in Underground Mines?

According to which schedule- training is given before employment of Every Person (All Persons) in Underground Mines?

How many Lectures will be given as training, to a person for working in Surface or Open Cast Mines as per VT rule 1966 ?

According to which schedule training will be given to the person appearing in the Gas Testing Exam within 3 months of the exam ?

Notice Of Contribution/ Termination Of The Post Of Director for the notice of termination of the post of Training Officer and Director is kept in Record in which Form?

1. Under which section of the Crenche Rules 1966, Mines Act - 1952 has been made?

2. When did Crenche Rules - 1966 Formed

come into force?

3. 'Crenche Means' women working in Mines Applies to children whose age is?

4. According to the Crenche Rule - 1966, who appoints the Medical Officer Incharge in Mines?

5. If Coal Mines has 10 or Less Women, will there be Plinth Area of ​​Crench in that Mines?

6. Mines Other than Coal Where 30 Or More Women Currently Employed in that Mines Crench of Minimum Plinth Area in sq. Meter?

7. Coal Mines Where 11 to 50 Women Currently Employed What will be Crench Minimum Plinth Area in sq. Meter?

8. Where More Than 100 Women Are Currently Employed in the Coal Mines What will be the area of ​​the Crench?

9. Mines Other Than Coal Mines Where More Than 200 Women are Employed What will be the area of ​​Crench in that mines?

10. Coal Mines Where 51 to 100 Women Currently Employed what will be Minimum Plinth Area in that Mines ?

11. Mines Other Than Coal Mines Where 101 - 200 Women Are Currently Employed What will be the Crench Area in that Mines?

12. In how many days should the Medical Examination of the children participating in the Crenche be held?

13. In how many days should the Medical Examination of the Attending Women be held in the Crench?

14. Record of Owner Agent Manager, Women Staff as per Crenche Rules 1966 Will do according to which schedule?

15. How many liters of water should be provided per Children for the children participating in the Crenche?

16. How much drinking water will be kept for Cooled Water Per Children for the children participating in the Crenche?

17. According to which schedule will the Cradles, Cots, Beds, Linen bedding, Feeding Bottles, Cooking Utensils of Children participating in the Crenche be maintained?

18. According to which schedule of Milk and Diet for Children participating in the Crenche Will be maintained?

19. According to crenche rules, The Floor Area Will Be Of Cement Or Stone, And The Height Of Ceiling Roof?

20. In which form the Attendance Record of Medical Examination of Children is kept?

21. In which Form for Recording the Result of the Medical Examination of the Nursing Mother's is kept ?

22. What is the Form for Recording the Particulars of the Children Attending the Crenche ?

23. Crenche Rules - Which rules were applicable before 1966?

24. Inspection of Crenche is done by?

5. If Coal Mines has 10 or Less Women, will there be Plinth Area of Crench in that Mines?

8. Where More Than 100 Women Are Currently Employed in the Coal Mines What will be the area of the Crench?

9. Mines Other Than Coal Mines Where More Than 200 Women are Employed What will be the area of Crench in that mines?